Honda CR-Z Upgrades to LED Honda Reflector Lens

Honda CR-Z is a very stylish and modern car, but iJDMTOY came up with a very innovative product – LED Honda reflector lens. The owner was looking for some stylish upgrade to his Honda CRZ and stumbled upon the iJDMTOY LED reflector, that turned the stock no-light-at-all black plastic piece to a real LED masterpiece. I guess this is a great way to spice up the stock look of any 2010 – Honda Insight, 2010- Honda CR-Z and 2012- Honda CR-V!

Honda CRZ LED Reflector Lens 1

The set features a pair of brand new high quality super bright brilliant red LED lights that perfectly replace the OEM red reflector and function as add-on brake light/tail light. It gives the vehicle a nice new appearance at night time and increases the safety by making the stopping vehicle more noticeable.

Honda CRZ LED Reflector Lens 2

Installing the LED Honda reflector lens is as easy as 1,2,3. Take off the no-light plastic piece, route and connect the wires to the brake light negative. Remember red wire goes to tail light positive, and yellow wire goes to brake light positive. This way the LED Honda reflector lens will function as additional tail light and brake light when needed. Once you are ready with the wiring, mount the LED reflector back in place. Please note this LED reflector is made based on the Japan Spec CR-Z, therefore for the US CR-Z without the reflector, it is a little bit off. Finally, switch on the headlights and check if everything works well. Don’t forget to ask a friend to step on the brake pedal to test the LED brake lights!

Honda CRZ LED Reflector Lens 3

This Honda CR-Z is ready to defile on the red carpet by itself, but with the incredible and exclusive Honda reflector lens, it will get more attention from people, that you can imagine! In case you decide to increase the safety, improve the overall look of your ride and you have just one shot – this is your chance. Get this brilliant red LED reflector from iJDMTOY at a very affordable price now!

Honda CRZ LED Reflector Lens 4

Red Color 15-LED Clear Lens Bumper Reflectors

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Exact Fit Chevy Camaro LED Interior Lights Now In Stock

As we mentioned this Chevy Camaro LED Interior Lighting Kit last month, now back in stock!

Chevrolet Camaro LED Interior Lights 1

Chevrolet Camaro LED Interior Lights 2

Chevrolet Camaro LED Interior Lights 3

These super bright direct exact fit 52-SMD LED interiors fit all 2010 2011 2012 Chevrolet Camaro.

To install these LED panels and LED bulbs are very easy, just plug and play, no modification needed.

Here is the product page:

Chevy Camaro direct fit 52-SMD LED interior package Xenon White 3 PCS Lights Exact Fit Vehicle Specific 52-SMD Complete LED Interior Package for 2010 and up Chevrolet Camaro

5 stars Available Color: Xenon White
one piece 42-SMD Exact Fit LED panel light for interior map/dome light
one piece 5-SMD 2825 T10 LED bulb for trunk area light
one piece 5-SMD 2825 T10 LED bulb for license plate light

2011 Chevy Camaro equipped with LED Interior Dome Lights

I love muscle cars and this 2011 Chevy Camaro has very attractive and modern Chevy Camaro LED Interior. This guy really like LED accessories and replaced the OEM 5th Gen Camaro interior light bulbs with Super Bright LED interior lights. The result, however, is quite impressive, and the car looks extremely cool with this Ultra Blue mod.

Chevy Camaro LED Interior Dome Lights 1

For your information, such LED kit could be installed to almost any car, truck or SUV as it comes with universal adapters. It features two 12-SMD 1210 type LED light panels, which could be picked in Xenon White, Ultra Blue, Brilliant Red or Emerald Green to match your style. But that’s not everything – the LED interior lights consume less power, which means that if you forget to switch them off and they stay on all night long, there’s a very big chance you can still start your car next day. However, don’t try this test and be sure to check out the product page at the iJDMTOY online store for full list of compatible wedge and festoon housings.

Chevy Camaro LED Interior Dome Lights 2

To install the LED dome lights, first turn off the dome light. You have to unplug the stock bulb, plug in the correct adapter, peel the 3M self-adhesive double sided tape on the back of the LED panel and stick the panel to the plastics. Once installed, you will notice the amazing difference in color these LED panel lights provide. The super bright light is no match to the old stock dull and yellowish bulbs, which makes these LED panels perfect for car interior lights such as map lights and dome lights. Just take a look at the brand new Camaro LED Dome Lights which perfectly match the red interior dash lights.

I guess you’ll agree with me that these Camaro LED Dome Lights will make any car more attractive, not just this 2011 Chevy Camaro. Why paying for some very expensive lightning accessories, when you can achieve this fancy look for just a few bucks? Get your car a fresh new look with iJDMTOY and turn your ride into a real head-turner!

12-SMD LED PCB Panel Lights

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

2008 Mercedes E350 LED License Plate Lights

One of our customers showed this installation picture for his 2008 Mercedes E350 LED License Plate Lights.

2008 Mercedes E350 LED License Plate Lights

Our 6418 LED bulb with built-in CAN-bus load resistors fits most European cars such as Audi, BMW, Mercedes or Porsche because this LED bulb is designed to be error free for European cars.

Our customer installed these LED license plate lights by himself, pretty easy, just plug and play.

Below is the product page:

6411 6418 C5W LED Bulbs

iJDMTOY Error Free 3-SMD-5050 1.50″ 36mm 6411 6418 C5W LED Bulbs w/ Built-in Load Resistors For European Cars

5 stars Available Color: Xenon White
Special designed for European cars such as Audi, BMW or Mercedes for license plate lights

Mean 2005 BMW M3 shines with BMW LED Halo Rings

Check out the super-duper cool 2005 BMW M3 – it has very nice custom BMW LED Halo Rings with stunning "fade on" and "fade off" effect. These BMW E46 3 series LED Rings are extremely bright and really set this M3 apart from all other bimmers on the street.

BMW M3 E46 3 Series LED Halo Rings 1

This LED BMW Angel Eyes Kit is 6 times brighter than conventional CCFL BMW Angel Eyes rings, with no blind point comparing with CCFL rings and awesome xenon white 7000K color. What’s more – this kit comes with all necessary brackets, double-sided tapes, etc. – completely plug and play with no modifications needed and will fit in several BMW models.

BMW M3 E46 3 Series LED Halo Rings 2

If you wonder how to install these pretty LED Halo Rings, then follow the steps. First open the hood and remove the corner lenses carefully. After that remove the weather stripping plastic above the headlight and the lower trim piece. Then you are ready to remove the headlight lens and the bezel around it.

BMW M3 E46 3 Series LED Halo Rings 3

The next thing you should to is to take the clips from the kit and attach them to the back of one LED Halo Ring. Once you are ready with this part, feed wires through headlight assembly holes and out the rubber grommet in back. After that you can use a screwdriver to gently open the clips and attach the ring to the headlight housing. Do the same process for the high beam light. Please note you have to leave sufficient clearance for projector movement!

BMW M3 E46 3 Series LED Halo Rings 4

Next up – wiring: Connect LED DriverPack wires to harness coming out of the headlight rubber grommet in back and tuck the DriverPacks away from heat and moisture. Then you are ready to reinstall the headlight bezel, lens, trim, weatherstripping and corner lenses.

BMW M3 E46 3 Series LED Halo Rings 5

Look for a small side cubby hole to bolt the relay. Then find the rubber seal covering the positive (+) terminal and route passenger side wiring underneath. Bolt positive ring terminal from harness to the positive terminal of the battery and bolt negative ring terminal from harness to negative terminal of the battery. Put back the rubber seal in place and connect harness ends to LED DriverPack.

BMW M3 E46 3 Series LED Halo Rings 6

Next, route driver side harness inside trim cover behind the engine, then underneath seal to DME cover and finally to driver side LED DriverPack. Connect terminals and remove the DME box cover. Here you have to find the +12V accessory wire (red/white with yellow dots). Once you are ready with this, splice supplied wire tap to +12V wire. Plug spade connector from harness into wire tap and put back the DME box cover.

Remove grommet from passenger side firewall, pierce hole through grommet and thread remote wire. Here you have to punch hole in carpet, route the wire through hole and reinstall grommet. Get in the car and remove passenger footwell light. Carefully reach inside and locate remote wire that you routed earlier. This is where you have to use the supplied wire tap on red/green wire for the remote fade in/out feature. The last step is to reinstall footwell light and test the BMW LED Halo Rings on your ride with the key remote. In case you have some questions regarding the installation process above, check out the detailed video on the product page or contact iJDMTOY.

This 2005 BMW M3 is a really mean machine, but with BMW LED Halo Rings from iJDMTOY, it looks completely different and awesome! If you are looking for something to make your bimmer hella cool, look no further! Go for it!

264-SMD LED BMW Angel Eyes Halo Rings Kit

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.