iJDMTOY Car Blog For Automotive Lighting

Honda CR-Z is a very stylish and modern car, but iJDMTOY came up with a very innovative product – LED Honda reflector lens. The owner was looking for some stylish upgrade to his Honda CRZ and stumbled upon the iJDMTOY LED reflector, that turned the stock no-light-at-all black plastic piece to a real LED masterpiece. I guess this is a great way to spice up the stock look of any 2010 – Honda Insight, 2010- Honda CR-Z and 2012- Honda CR-V!

The set features a pair of brand new high quality super bright brilliant red LED lights that perfectly replace the OEM red reflector and function as add-on brake light/tail light. It gives the vehicle a nice new appearance at night time and increases the safety by making the stopping vehicle more noticeable.

Installing the LED Honda reflector lens is as easy as 1,2,3. Take off the no-light plastic piece, route and connect the wires to the brake light negative. Remember red wire goes to tail light positive, and yellow wire goes to brake light positive. This way the LED Honda reflector lens will function as additional tail light and brake light when needed. Once you are ready with the wiring, mount the LED reflector back in place. Please note this LED reflector is made based on the Japan Spec CR-Z, therefore for the US CR-Z without the reflector, it is a little bit off. Finally, switch on the headlights and check if everything works well. Don’t forget to ask a friend to step on the brake pedal to test the LED brake lights!

This Honda CR-Z is ready to defile on the red carpet by itself, but with the incredible and exclusive Honda reflector lens, it will get more attention from people, that you can imagine! In case you decide to increase the safety, improve the overall look of your ride and you have just one shot – this is your chance. Get this brilliant red LED reflector from iJDMTOY at a very affordable price now!

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

The 2012 Honda Civic offers very minor interior changes, so the owner of this ride wanted to fresh up the interior and installed Honda Civic LED interior lights. I think installing this kit it’s a perfect way to provide more light inside the cabin, which has picked up a tad more passenger room. Take a look at the photos and see for yourself the awesome lighting output that shines brightly and makes keypads, menu buttons and entire car interior far more visible.

iJDMTOY offers everything – the super bright Xenon White set includes 2 pieces 24-SMD Exact Fit LED panel lights for front map lights and 1 piece 60-SMD Exact Fit LED panel light for center dome light. These shine in 6000k Xenon White and you feel like drowned in pure light. With a total of 108 pieces SMD LED lights, achieving energy-efficiency and trendy look of your car is just one step closer.

Utilizing the latest in LED technology, iJDMTOY has developed this SMD LED interior package for 2006-2012 8th and 9th Gen Honda Civic Sedan or Coupe, with plug-and-play system that installs in minutes with no drilling, cutting, or fabrication required. First make sure interior lights are turned off and remove the cover for the interior dome light. You can use a flat screw driver and gently wiggle it around to loose the snaps. When light cover is removed, take the OEM bulb out of the socket and replace with the proper Exact Fit LED panel. Peel the double sided tape on the back and once LED panel is in the desired position, press it firmly onto the base. Put back the light cover until it clicks and that’s all. Do the same with the other Honda Civic LED interior lights for a bright and crisp light.

This 2012 Honda Civic is equipped with Honda Civic LED interior set and looks very good. The featured LED upgrade provides you with comfort and style, and to be honest, these two are always welcome. The best part is that you don’t have to spend a fortune to get LED for Honda Civic, but just a few bucks. And in case a blue interior light will match your ride and style more than the Xenon White, then don’t hesitate to pick the ultra blue color option.

Brought to you by iJDMTOY.com, the expert for your Car LED. MONTH-END Sale, for more information about LED interior lights installation, please check How to install LED Panel Lights or How to install LED dome light base on a Hyundai. 7/30 & 7/31, when you order over $100 get 15% off using promo code: JulyEnd

Today’s 2013 Honda Civic benefits from a significant refresh and with the featured Honda Civic LED DRL upgrade, this car looks awesome. You just can’t miss the super cool front-end look that clearly follows sporty lines – black honeycomb mesh grille, more aggressive front bumper, great styling and LED Civic High Beam DRL.

When the Error Free 9005 (HB3) LED DRL kit from iJDMTOY was installed, this happy customer took some pictures of his Civic and posted them on a famous Honda Civic Forum. As you might expect, only positive feedbacks were received from many car enthusiasts. Once he got rid of the yellow light and replaced the stock DRL bulbs with the Error Free 9005 LED bulbs, everybody loved the new sharper look of his 2013 Honda Civic.

You can upgrade the front-end look in just a few minutes with this completely plug and play product, too, as this 9005 LED bulb will directly replace the stock 55W 9005 (aka HB3) halogen bulb on the high beam function as daytime running lights. A special DRL decoder set will ensure the LED bulbs light up without malfunction issue nor flickering issue and you’ll get a nice HID matching look without paying for HID kit.

Installation is very easy – first make sure the car is off and remove both left and right stock daytime running light bulbs and harness. Then connect back with the special harness to one side, and one resistor decoder to the other side. Next plug both LED bulbs to the special wiring and plug the other resistor decoder as well. Finally install back with the 9005 (HB3) LED bulbs on each side and you are good to go!

This 2013 Honda Civic really stands out from the crowd and the Honda Civic LED DRL kit from iJDMTOY contributes to the fact. Here we talk about combination of quality, brightness, safety and style – this is what you get for your money! If you want to give your car an awesome luxury look and safety improvement, then opt in for this high quality Civic High Beam DRL kit.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Honda S2000 – the high-revving roadster is a great platform for many tuning enthusiasts and today we’ll present you the S2000 DRL LED addon. The car was released by Honda to celebrate its golden anniversary many years ago and having this in mind, iJDMTOY designed these special direct fit 9-LED daytime running light lamps for 2004-2009 Honda S2000 (AP2).

This awesome product will replace the stock Honda S2000′s lower bumper plastic cover with very nice LED DRL. Despite the modern look of these S2000 DRL, installation is super easy. First you have to clean and prep the area, so that it is free of dirt, oil, water, etc. Then you have to identify which wire coming out of each DRL lamp is the positive (+). You can do this by simply tapping the wires to the car battery terminals. If DRL light up, then the wire, tapped to the battery’s positive is the DRL’s positive (+) – remember it. Otherwise, switch the two wires around and try again.

Once you are ready, run the wires through the hole and mount the DRL in the desired location. Please note this is a direct fit kit, but you can always use 3M tape or screws to fix it more securely. When running the wires up into the engine bay area, make sure they are tucked up and out of the way, so the wires won’t drag on the ground as you drive. Next, locate the power wires for the parking lights so that you can hook the positive (+) wire of the DRL to the positive (+) wire of the parking lights and negative (-) wire to a good metal ground free of paint (or battery’s negative). Before proceeding with the other lamp, turn on the parking lights and check of proper functions. If it does not turn on, check for any loose wire and make sure the wires don’t interfere with any moving or mechanical parts on the vehicle. In case all is good, proceed with the other Honda S2000 DRL.

The wiring method described above is fine if you want to use your LED DRL when you turn on the parking lights, but if you connect the positive (+) wire of the DRL to the ignition fuse box and negative (-) to the batter’s negative (-) terminal, the Honda S2000 DRL will turn on when the key ignition is on. However, if you are more advanced car enthusiast, you can add a switch near the dash, so you can switch them on/off whenever you like, but always have in mind the power must go through a fuse. Anyway, wiring is up to you.

If you own a Honda S2000, then you just can’t go wrong with purchasing these S2000 DRL. Check out the featured Honda S2000 – these 6000K Xenon White DRL perfectly match any HID headlights, giving the car a fresh new aggressive look. If you are looking how to make your Honda S2000 stand out, then check out the iJDMTOY website.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes. For more information about LED DRL, please check How to Install Lexus RX350 LED Daytime Running Light Bulbs or How to Install Hella LEDayline Style LED Daytime Running Lights.

It has recently been standard and popular for more recent cars to get LED lights on their license plates. The reason why? The LED lights are inarguably much better looking and brighter.

Now, if you own a Honda Accord, Honda Civic or Acura TSX model, below are the step-by-step about how you can set up LED lights on the license plate:

• Find the ideal LED lights for the Honda Accord/Honda Civic/Acura TSX. All you get to do is to go on the internet. Your 1st stop is Osram Bulb Guide. You can easily find the bulb size you need for the license plate lights which is size 168. Then, your 2nd stop is iJDMTOY.com. Make a simple search for the any of the following key phrases like "Honda Accord", "Honda Civic", "Acura TSX", "168 LED ", "license plate bulbs". In a few moments, you can already obtain the a lot of links about the LED license plate lights that will fit your vehicle. Of course, it is important to limit your search by the color and LED bulb design. Prior to you make the purchase, find out about your local law for the LED coloring. Some States do not permit the use of colored LED lights put in over the license plate.
• Install the new LED lights on your Honda Accord/Honda Civic/Acura TSX. Open your car's trunk. Try to find the trunk lid liner. It is the carpeted part. Take it out. Then, get a screwdriver. Begin loosening all of the plastic clips. Let each of them pop out. Be more careful the following. You do not wish to break any of those plastic clips. Don't push them out. Depend on your screwdriver in doing the job smoothly. Also, keep all the plastic clips together. You will need all them so that you can reinstall the trunk lid liner back.
• Once you have taken off the trunk lid liner, take a look at the bulb sockets. There are 2 of them and they are made of plastic. Reach the first bulb socket. Twist it bit by bit. Twist counter-clockwise. Keep on twisting until it gets completely loose and you can remove the light bulb. Move forward by swapping it with one of your new LED bulbs. Do the same methods to replace the second bulb socket with another new LED bulb.
• Take a look if the new LED lights are functioning properly. Before you put back everything, check your recently mounted LED bulbs by turning on your car's lights. If they are not working properly, try to reverse them around 1st. See if there is any improvement. If still nothing happens, check the metal contacts. Try to spread them out a little bit. Next, put the bulbs again. This should do the trick. If they are ALRIGHT, use your screwdriver and use it to install back the plastic clips. Tighten them. And then, reposition the carpet cover over the trunk lid liner.

If you have picked up the appropriate LED lights for your license plates, your buddies, and co-workers are surely gonna be thrilled to note the improvement. Of course, besides from standing out, the license place will certainly be properly seen.

Here are some pictures for how to install the LED License Plate Lights, please take a look

For more about Car LED lights, please visit us at www.iJDMTOY.com