iJDMTOY Car Blog For Automotive Lighting

If you own a BMW E46 3-Series and are tired of looking at other BMW’s such as the newer 3-series models which come with bright and vibrant LED angel eye rings, we have a solution for you! We have designed a specific kit to fit the E46 to give it a newer, updated look that sets you apart from the other E46 models out on the road.

Do not be intimidated by the installation procedure of opening the original headlamps, the E46 is not sealed with adhesive unlike other car headlights, it is sealed with rubber grommets and seals which can be easily removed by following the DIY (Do It Yourself) guides we have available on our website. The overall installation may seem difficult, but by carefully studying the DIY guide and taking your time, it is a very reasonable and modest install.

With these LED angel eye rings, they offer many advantages over conventional CCFL style angel eyes you see on the market such as; no blind spots around the ring, they are six (6) times brighter, and they are much more reliable. Each LED ring contains 66-SMD 1210 LED chips which produce a vibrant 7000K color that will definitely turn heads anywhere you drive.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

For those of you who own a BMW, you may wonder why when you replace your OEM turn signal bulbs with LED’s, the outer rings do not light up as evenly as the inner rings. This is a result of the design of the housing itself and not the bulb. Both the outer and inner rings receive light from the same source, but the only difference is that the outer ring’s light has to travel a much further distance compared to the inner rings. LED’s are brighter and more efficient than traditional incandescent bulbs, but the only downside is that LED lights do not project their light as far as incandescent bulbs do. This is the reason why the OEM bulb can light up the outer rings much more evenly since the light can project further and travel a longer distance.

Our LED angel eye bulbs will provide you a nice upgrade over the color and output in the inner rings. The outer rings will still be lit up, but it may not be as noticeable during broad and direct daylight due to the design of the housing. However at night or on an overcast day, the rings will be very noticeable and be quite a head turner.

This may bring up the question of why do the newer BMW models have amazingly bright LED rings that can be seen during direct sunlight so distinctly; this is due to the design change of the newer headlights. The latest BMW vehicles come with LED-lit angel eyes from factory and each ring is powered by LED(s) instead of using one bulb to light up two rings. Since each ring is individually lit, the light is more focused and concentrated which allows the ring to be lit evenly and with a lot of output.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Check out this Lexus IS350 with iJDMTOY’s LED Strip for trunk. This LED strip solves the issue with the stupidly dim stock light in the trunk/cargo area and what’s more, it does it in style. The owner of the car will be able to see and find stuff in his car trunk now.

Do you want to make your trunk brighter? Well, this amazing product over here, being 12" long and 0.25" wide, will not only make it brighter, but will easily light up the whole trunk like daytime at night! Want a bright, crisp light that offers incredible visibility and a custom look? Then look no further – go to iJDMTOY store and grab the LED Strip for trunk.

As you might expect, the installation is a breeze! Completely plug and play, this product comes with one T10 and one size adjustable festoon adapter that will fit for most cars, SUVs, trucks. Start with finding a place where to install the LED strip for trunk. We highly recommend to replace the trunk lamp located in the middle of the trunk in order to achieve maximum lighting effect. You can use a small flat screwdriver to open the cover of the lamp, but be careful not to crack the plastic cover. When you take it off, plug out the stock bulb and plug in the right LED trunk light harness. Then use the double-sided tape on the back of the LED strip to mount it in the trunk.

If you like this Lexus IS350 with the featured LED strip for trunk and want to get rid of the horrible light in your trunk, then this is for you. Get your LED lights, pop them in and enjoy the nice and bright Xenon White color.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

If you own a newer vehicle, you have probably noticed that the turn signal housing in the headlight or tail lights are clear which allow the orange/yellow bulb to show which can be quite an eye sore. Aesthetically, having a clear colored housing with an "egg yolk" look is not appealing as it does not flow with the rest of the housing.

Fortunately for you all, we offer replacement LED bulbs that still shine orange/yellow, but will not have the unpleasant egg yolk look when the light is off; instead the turn signal housing will blend into the rest of the housing.

Not only will these lights be aesthetically pleasing to the eye, they can also stay within the legal guidelines of the road which state that turn signals and indicators must be amber/yellow. These lights are plug and play and very easy to install, simply remove the original bulb and replace with the LED turn signal lights. Please do keep in mind that whenever you change your turn signals to LED, load resistors will be required to allow the lights to flash at the same as stock; since LED bulbs draw less power, the turn signals will blink as though a bulb is out.

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

As car enthusiasts, we all take notice at the smaller details that you see on other vehicles on the road; for example, Audi’s and their revolutionary approach to LED daytime running lights as a strip underneath the headlights. Ever since that style of light was introduced into the market, all kinds of car enthusiasts have wanted to mimic this style of light for their own cars, whether it was an Audi or not.

Take for example, a customer of ours with a Mini Cooper decided that he wanted to obtain this look with our simple to install Audi Style LED strips. We offer a variety of LED strips in different sizes and styles which suit a large array of vehicles and applications. For most customers, the LED strip lights are placed underneath the headlight to imitate the Audi-style look, but our customer decided to try a different approach instead by placing it on top of his headlights; we think it still looks good.

These strips are easy to install with use of 3M Double-sided tape or silicone adhesive to almost every application. The power source used to light these strips up will be your choice; you get to wire these to any power source you wish the LED strip to be on with such as your parking lights, ignition wire (when the vehicle is on), and much more!

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.