Tag: Car LED
2012 Lexus RX 350 is one of the finest SUVs in terms of comfort, looks, and reliability but it looks absolutely stunning with a pair of these cool 9005 LED DRL. Check out the pictures of 2012 Lexus RX 350 and just see for yourself how great it looks with these little 9005 DRL. The 2012 Lexus RX 350 looks like a beautiful crown studded with bright white diamonds with this pair of Lexus LED DRL.
Daytime running lights should always be bright according to European automobile laws and standards. 9005 DRL not only works great as daytime running lights but it also gives your Lexus a complete new and innovative look. With 9005 LED DRL, the days of old school yellow daylights are long gone. Nowadays, lots of people prefer to use LED DRLs as they are a lot brighter and better than traditional yellow lights. It becomes very difficult to notice yellow lights during the day time but you can easily spot the sparking 9005 LED DRL lights from a long distance.
These 9005 LED DRL lights are designed in such a manned that they fit well on models such as 2006- up Lexus IS 250, IS 350, GS 300, GS 350, ES, 350 and many more models. It is extremely easy to install these babies as you have to just replace them with your older lights. There is absolutely no need to do any kind of wiring work to install these Lexus LED DRL lights. All you have to do is just ‘plug and play’. If you find any difficulty in installing them then you can contact iJDMTOY.com for technical assistance. However, trust me, installing these 9005 LED DRL lights is as easy as replacing an electric bulb.
Normally LED DRLs show errors on installation and people also experience flickering problem while using them. But, Lexus LED DRL comes with DRL LED decoder, which helps in stabilizing the LED DRL lights. So, if you have installed 9005 LED DRL lights along with DRL LED decoder then you will never experience any kind of malfunction as well as flickering problems.
In terms of cost, iJDMTOY offers the best 9005 DRL at a very cheaper price than other websites. If you want to buy good quality, long lasting, and low priced upgrades then just log on to iJDMTOY for lots of exciting deals on upgrades of your choice.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes. The Memorial Day is coming soon, for a limited time only, get 15% OFF for order over $75, plus 2 free Domo Kun JDM decals, promo code: HERO from 5/25 – 5/29.
Check out this 2008 Acura TL – a very nice styling change was achieved with the awesome Acura TL DRL and the ultra blue LED interior lights. Beauty is subjective, but for what it’s worth, I think this Acura TL is a great looking car. Granted, most models look tragically similar, but I bet you’ll never mistake this midsize entry-level luxury sport sedan with anything else in traffic.
Of course what you see is what you get – super bright 9005 68-SMD LED bulbs that fully light up the daytime running lights, but here we have a small and essential Error Free DRL controllers, that are hidden under the hood. Thanks to these advanced controllers, 2007-2008 Acura TL or TL Type-S owners will get see no more the error message on dashboard. If you want to get rid of your ugly ‘amber’ colored running lights, then these are a must have!
Installation is very simple, even for people with very little car experience. These LED bulbs are plug and play, which means they are direct replacements for the OEM 55W 9005 (aka HB3) halogen bulbs, used for fog lights or daytime running lights. But first things first: make sure the car is off, then locate and remove both left and right stock daytime running light bulbs and harness. Next, connect the passenger side with the special decoder and install the relay on the driver side with both Acura 9005 DRL LED bulbs. Be very careful to make sure once the new LED DRL is in the spot inside the headlight casing to not try and force it to turn into place because the plastic pieces can and will snap if its not perfectly set. Easy as a pie, huh?
The 2008 Acura TL is a marvelous combination of machinery, imagination and execution by itself, but with the new designed Acura TL DRL decoders, you can upgrade your DRL with LED bulbs, that are very noticeable even under the sun! So, treat your car as it deserves and check out the iJDMTOY’s store.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.
Particular thanks to Bimmerfest Forum for the following magnificent installation guide.
Before you start be certain you have 1-2 hours to dedicate to setting up these. They include resistor boxes and different wiring attached to them so you need to hide all this kind of stuff. The ONLY way to do it right is to remove the black trunk panel and both sides of the carpet lining (this particular might be folded back out of the way truly). Also before you start, simply unplug your factory lenses and plug in the new led ones to test to make sure everything features and you have no bulb out lights on the dash. Almost nothing worse than setting up an install and getting that the units were faulty to start with… yes it’s occured to me more than once with other items. Consequently here’s what you are starting with:
First thing to do is to get rid of the tail lights you have on the car presently… there are actually just 3 nuts on the back, super easy. I won’t go into much detail about this particular. There are a lot of DIYs out there on this particular. Next pull out the trunk bottom carpet with the contoured black bottom thing. Subsequently pull back the trunk’s side carpets. If you have a friend you can certainly have him carry all those away from the way but I merely put something heavy in front of them so they couldn’t come forward. Currently you could begin removing the long black plastic liner on the back side of the trunk (shown in the bottom of the image at the incredibly back of the trunk). There are 4 screws below covers, and 5 push pin retainers if I keep in mind correctly. It genuinely allows you have one among all those interior clip/panel removers to move all the clips off, nevertheless it can be done with a screwdriver and some patience. Soon after you pull off the plastic panel you could start getting in the new LED tail lights.
FYI… mark all the clips with a sharpie or a little something so you remember which ones go to which. Don’t attempt to mount the lenses with all the guts hanging off the back of them… it will probably help to make your life quite difficult and frustrating, inquire how I know. Also you need to make use of the black trim things off your recent tail lights and shift them to your new ones. The quickest way I could do it was to insert a little flathead screwdriver between and pry up slowly. You may possibly try spraying WD-40 on the fins that clip and then sliding it off… but I don’t know how well that would certainly work. I went with the screwdriver. Having these kinds of off your old lights and onto your new LED tail lights is likely the hardest part apart from yanking all the panels off the automobile. You can easily discover the black trim I am talking about on the exterior of the trunk on the left side of the graphic. Oh ya when you are installing the aftermarket tail lights really don’t put that third nut on the bolt right until you are willing to deploy the black panel back into the automobile. You could see I only have 2 of them on in the photo… the other you ought to put on after the black panel is on.
As soon as you get the LED tail lights in you could reattach all the guts to the back of them. Simply match the plugs you marked in the beginning. Appears like plenty of crap right? Well it is… along with it would certainly have been nice of the manufacturer to leave more wire at the aftermarket tail lights side so you may tuck and hide everything easier. Well, they didn’t… so you are stuck installing the boxes where I did… that small cubby beneath the lights that you find all the wires going into in the photo underneath. All 3 boxes are in there and match perfectly. Today plug in the lights and test all the performs again. Furthermore aim to attach the interior trunk light to the back of the light. This takes awhile to tuck all the wires somehow that it doesn’t interfere with the light. Although far better to do it now than when all your panels are going back on and in the way. The moment you obtain almost everything where you need it… time to put all those panels back on. This particular is self informative so I won’t get into that.
Right now you’re done, stand back and take pleasure in your new younger searching Bimmer… listed below are a bunch of my accomplished install photographs. Since for a full review… I am VERY satisfied with the LED tail lights. They are every bit as bright as the OEM ones and function just as well so far.
Introducing iJDMTOY’s new products for projector headlights, and LED tail lights.
Installing LED Tail Lights is an excellent way to improve the appearance of your car exterior. Not only this, in addition, the LED tail lights will provide your a clean, custom look. Last but not least, the LED lights tend to last much longer when comparing with the traditional tungsten filament bulbs from regular tail lights.
Swapping stock tail lights for LED tail lights is not that difficult like it might appear. Simply follow this easy step by step guide to have the LED tail lights added to your ride and let other envy for what you have.
Step 1: Remove factory tail lights assembly. The tail lights for most cars are simply bolted on from the inside of the trunk. You just need to remove the trunk carpet cover and un-bolts the tail lights. Slowly move the loosed tail lights a little by a little to have the tail lights removed completely. Do not hurry on this step, because you might break any clips that are used to hold the tail lights from inside.
Step 2: Remove all the light bulbs from the factory tail light housing and disconnect any wiring harness connected to the tail light assembly as well. I will recommend you use the scotch blue tape to write down the turn signal lights, brake lights, backup lights and put on each set of wires so later when you put them back, you won’t get confused.
Step 3: Take your LED tail lights out from the box and try to put the tail lights back up just to make sure this is the correct part/side before you put all the bulbs back in.
Step 4: Connect the aftermarket LED tail lights with the factory wirings. For most LED tail lights, for example the ones we carry at iJDMTOY.com, most of the sockets and plugs are already designed to be simply plug and play. However, if there are any hard wiring required. Simply connect the stock red wire to the LED tail light red wire, and black wire to black.
Step 5: Before have the LED tail light completely bolt-on back, test it first. Test the brake light, test the turn signal light and test the backup lights to make sure everything works. If unfortunately one of them does not work, inspect the connection, because this is the most common reason for a lamp not lighting up.
Step 6: Place the LED tail lights back into the original tail lights locations. Use the blue tape to hold the tail lights if you are doing this by yourself or have your buddy hold it for you so you can bolt it back. Don’t bolt the screw completely tighten in, because you want the tail light to completely back to the proper position, then tighten every screws.
Step 7: That’s it and enjoy your aftermarket tail lights!
This 2009 BMW X5 is today’s featured luxury crossover – it is customized in many ways, but the LED Daytime Running Lights catch the eye! The ridin’-high body of the family-friendly Bavarian SUV is underlined and emphasized with these magnificent and stylish 5-LED DRL which are kind of unique. The customer added a small touch of uniqueness by painting the covers to black, so they better match with his black X5.
The Ultra-slim Design of the Xenon White LED add-on fits perfectly and is great match to the whole modern look of the vehicle. All I can say is: "Wow, this is hot!" It makes the whole car look lower and wider and what’s more – this quality product has really powerful output. Another customer even stated "I can literally use this LED daytime running lights as fog lights!"
Anyway, as you may have already noticed, these Brabus Style 5-Light LED DRL are very nice and attractive upgrade to any car, SUV or truck. The kit is mounted in between the bumper grill, or below bumper, and the best part is that it comes with the wiring harness for easy wiring. In case you wonder whether this stuff will be working after all those rainy days, don’t worry – it is completely waterproof! And on top of that, installation is very simple and is completely DIY. However, you can always contact iJDMTOY for some help, but honestly – getting these bad boys working will take you less than an hour!
The 2009 BMW X5 is just as stylish as its predecessors, but here we talk about some modern upgrades – just like these LED Daytime Running Lights. You don’t have to be a rocket scientist or spend a fortune to get the awesome Euro look like the new Mercedes-Benz E Class, S Class, or Porsche Carrera, etc. Just check out the iJDMTOY online store for excellent quality LED accessories at low price!
Visit our friends!
A few highly recommended friends...