Love the strip lights on an Audi but don’t actually own one? These special Audi style side glow LED strips gives your car that Audi look without the expensive sticker price of actually buying an Audi. So this is a great way to get in touch with your inner Audi fan as well as to pay tribute to this iconic luxury brand.
Tag Archives: cars
LED Halo Fog Lights Are a Customizer’s Dream
Projector fog lights are a must-have for any car enthusiasts where beginners and experts can both appreciate. These LED Halo Fog Lights are 3 times brighter than traditional CCFL to really showcase your new lights. These LEDs are actually very versatile because they can either be used as fog lights or head lights. That leaves customization directly up to you!
Installing New Lexus LED Bumper Reflector Lights
Installing a pair of new LED bumper reflector lights can add in both style as well as safety for your car. This installation does involve removing the bumper and connecting some wiring; therefore, please take a look at this DIY guide to at least get a better idea on how to do this. These LED reflectors are compatible with 2008-up Lexus IS-F, 2003-2009 Lexus GX470, 1999-2003 Lexus RX300, 2011-up Toyota Sienna (For L LE XLE models only), 2009-2012 Toyota Matrix, 2009-up Toyota Venza, and 2013-up Toyota Avalon. If you want to upgrade your car but wasn’t sure what mod was worth it, these new bumper reflector LEDs are a great way to start.
1.) The original bumper reflectors are held on by clips or screws, so we recommend removal of the bumper to get a better access of the back. (1, 2)
2.) Find the stock taillight wire harness. Tap the LED bumper reflector wires (red, white, black). Match the black wire to stock brake light negative, white wire to taillight positive, and red wire to brake light positive. Connect the wires together with t-taps and cover any exposed wire with electrical tape. You can also extend the stock wire harness for a cleaner installation. (3)
3.) Replace the stock bumper reflectors with the new LED bumper reflectors. Tap the wires and install everything back the same way it was removed. Test the lights to see if the LED reflector lights up. (4, 5, 6)
As you can see, you don’t have to compromise safety with aesthetics! Your new LED bumper reflector lights are sure to make you stand out in the crowd and make your Lexus or Toyota very unique. Where can you get subtle, yet flashy at the same time?
Subaru WRX: How to Install LED DRL Wiring
This guide is to show how to install the daytime running light wiring in a 2012-up Subaru WRX. This is especially important because if we directly install the LED bulbs on 2012-up Subaru WRX high beam daytime running lights, the LED bulbs will not fully light up. The new LED bulbs for daytime running light is a great addition to make your stock Subaru WRX stand out.
1. Remove the plastic cover to access the bulbs underneath.
2. Unplug and remove the stock bulbs.
3. Install this specially designed LED DRL relay harness.
Please take a look at this diagram below to help illustrate the relay harness installation: Connect #4 and #5 to the LED bulbs Install the LED bulbs just like how we took out the stock bulbs Connect #3 and #2 to the ground To find a better ground, we need to find a bolt that has no paint and no rust. Connect #1 to battery positive. Always connect #1 last.
4. Connect #6 on the diagram to the driver’s side stock socket. For the passenger side stock socket, we cover it with black tape since it’s not going to be in use.
5. Test to see whether or not the lights work, if the light doesn’t work, flip #6 180 degrees.
As you can see, the installation isn’t difficult to attempt at all, and will give your Subaru WRX a nice set of of super bright LED Daytime Running Lights. LED Daytime Running Lights are such a great addition!
Exclusive! LED Eyelid Module For BMW 560 LCI 5 Series
Want to give your prized baby a nice facelift? This xenon white BMW LED Eyelid is a great way to spice up your ride while adding some unique style and pizzazz on the road. This E60 LED eyelid mod is so exclusive that it’s only compatible with 2008-2010 BMW E60 5 Series only. You would also have to make sure your 5 Series has the LCI headlight before buying this add-on.
