Car fans all around seem to agree on one thing: their cars look much better without the front license plate right in the middle of the bumper. Many people even opt to remove the entire license plate completely. While the lack of the front plate in the middle of the bumper looks great, it does draw unwanted police attention. When you add that with a loud exhaust and a bagged ride, the police are practically eating their donuts next to your driveway.
Fortunately, there’s a quick alternative to the front plate, and that’s by relocating it to the side via the tow hole. You get to keep your front plates and still get a sporty racing look. This license plate tow hook mounting bracket uses the tow hole to screw in the mounting stick and plate to the side of your bumper without having to drill or modify your bumper in any way. This license plate tow hook mounting adapter is available for a ton of cars, including BMW, Mercedes Benz, Audi, Lexus, Toyota, Scion, Subaru, Nissan, and more. If you don’t see a set available for your car, you just need to check your bumper to see if there’s a tow hole. If there is, you can bet that there will be one available soon.
This switchback LED bulb is specially designed so that it functions as a rear fog light as well as a backup light. Switching from your stock bulb to the new switchback LED reverse light/fog light bulb is not complicated and involves some pretty straightforward steps. This LED rear fog light/reverse light upgrade is compatible with 2011-up Chevy Volt and the new 2015 Ford Mustang.
Step 1: Remove the Hex and Torx screws circled in red that are located at the bottom of the vehicle’s rear.
Pull the lower inside corner out and pull gently to work your way to the outside. When you get to the 2 outer clips, try not to pry too much. Make sure you’re pulling the insert straight and forwards out of the bumper.
Thinking about some kind of LED upgrade but not sure where to start? Or maybe you want to dabble in the world of car modifications but wasn’t sure what installations would do you Mercedes-Benz justice? You can try to get your feet wet with LED license plate lights if you want to look different from everyone else on the road without having to try anything too advanced. This high powered OBC error free LED license plate light is a great choice.
There is no modification required for this installation, but it may be a little tricky when it comes to accessing the license plate lamp from outside of the trunk. You can remove the trunk liner/trim for better access.
1. Take off the trunk lid’s inside panel and take off the carpet behind the trunk lid.
One of our most asked questions from Kia Optima owners is where to find the ACC in the fuse box when they install products such as LED daytime running lights. Fortunately, one of our customers stopped by and we were able to determine where one of the better ACC locations is.
So where is the ACC location?
Open the hood and you will see that the fuse box is on the driver side. Remove the C Fan (cooling fan) 4-pin micro relay module. Tap the red wire of the LED daytime running light module box to the 87A location and plug back the module.