These are CAN-bus error free LED turn signal bulbs on a Volkswagen and come in either xenon white or amber yellow. They serve to replace the stock PWY24W/PW24W incandescent bulbs for a whole new clear look. Not only are they brighter and sharper, they also have a faster response time than stock bulbs. Their clear look also gets rid of the "fried egg" look. Because this LED turn signal bulb is a plug-and-play, there is no modification required.
1.) Remove the tail lamp to gain access to the rear of the turn signal lamp.
Shopping for LED halo rings for your BMW may seem like a daunting challenge because there are so many options to choose from, but it’s really not as hard as you may think. As long as you know the model and the year of your BMW, shopping for angel eyes is actually pretty easy. If you thought otherwise, you’re just scaring yourself for absolutely no reason at all. We have a handy BMW LED Angel Eyes Guide to assist you in the process.
When you browse the LED angel eyes compatibility list, it may seem like there are a lot of choices, but all you need to do is narrow it down according to your model and year and you are pretty much good to go. Some vehicles only have one option available so you won’t have to sit around wondering if you should buy the ring marker bulbs or the halo rings because the decision has already been made for you.
If you follow the chart correctly, you won’t have to worry around buying the wrong LED bulbs for your BMW and have to go through the hassle of exchanging them. To find the appropriate LED ring marker bulbs or LED halo rings, simply start at the left most column and pick which model BMW you own. Go to the model year that applies to your BMW, and see if there is a link option for either the LED ring marker bulbs or the LED halo rings. Just keep in mind that your BMW has to have OEM xenon adaptive headlights in order to be compatible with the ring marker bulbs.
This set of xenon white 16-LED high powered daytime running lights for the 2013-up Ford Fusion (aka Ford Mondeo) gives your car a new look and replaces the original fog lamp bezel or lower bumper grille cover. It has a metal finish look and piano black glossy finish that make it look ultra luxurious, as well as 7.5W in each lamp and a special anti-glare design for safety purposes. The LED DRLs are great for both models of the Ford Fusion with or without the OEM fog lamps with no modification required. Here is how you install these LED daytime running lights.
Today, we tried to install an H11 HID Conversion Kit and we encountered an issue of it not lighting up, but we quickly found a solution that fixes this. The most common issue that causes the HID to not work is that it doesn’t get power. We all know that we have to check the polarities, but what if the HID doesn’t even receive power? Before you can even check the polarity, you have to make sure that the connector and the adapter are snapped in together properly. What we encountered here is actually a textbook issue because the adapter wasn’t completely snapped in; therefore it doesn’t even receive power.
1.) One of the reasons why it sometimes doesn’t completely snap in when you try to connect the adapter to the connector is that the stock wire is hidden all the way underneath, making it difficult to get a firm grip on both parts to snap the connector.
This guide is for 2008-2010 Mercedes Benz W204 C Class to convert the stock sport front bumper’s halogen fog lights to the 2011-up LCI style LED daytime running lights. This installation would give your car that nice, crisp and signature LED daytime running lights look that the new Mercedes Benz C-class vehicles are famous for. However for this installation, please keep in mind that you have to remove the front bumper to perform this installation, and there is also some retrofit modification involved where you’d have to cut the stock bumper in order to fit the new LED daytime running lights. Because of this, we highly recommend professional installation.
1. There are three screws at the corners of the stock fog lamp that you’ll need to remove in order to take out the stock fog lamp bezel. After you do this, you can remove the front bumper.
2. You’ll need to cut out the original fog lamp bed with stock fog lamp outline in order to proceed. Use a cutting tool to cut around the edges of the opening.