2012 Honda Civic Looks Better with Honda Civic LED Interior

The 2012 Honda Civic offers very minor interior changes, so the owner of this ride wanted to fresh up the interior and installed Honda Civic LED interior lights. I think installing this kit it’s a perfect way to provide more light inside the cabin, which has picked up a tad more passenger room. Take a look at the photos and see for yourself the awesome lighting output that shines brightly and makes keypads, menu buttons and entire car interior far more visible.

LED for Honda Civic Sedan or Coupe 1

iJDMTOY offers everything – the super bright Xenon White set includes 2 pieces 24-SMD Exact Fit LED panel lights for front map lights and 1 piece 60-SMD Exact Fit LED panel light for center dome light. These shine in 6000k Xenon White and you feel like drowned in pure light. With a total of 108 pieces SMD LED lights, achieving energy-efficiency and trendy look of your car is just one step closer.

LED for Honda Civic Sedan or Coupe 2

Utilizing the latest in LED technology, iJDMTOY has developed this SMD LED interior package for 2006-2012 8th and 9th Gen Honda Civic Sedan or Coupe, with plug-and-play system that installs in minutes with no drilling, cutting, or fabrication required. First make sure interior lights are turned off and remove the cover for the interior dome light. You can use a flat screw driver and gently wiggle it around to loose the snaps. When light cover is removed, take the OEM bulb out of the socket and replace with the proper Exact Fit LED panel. Peel the double sided tape on the back and once LED panel is in the desired position, press it firmly onto the base. Put back the light cover until it clicks and that’s all. Do the same with the other Honda Civic LED interior lights for a bright and crisp light.

LED for Honda Civic Sedan or Coupe 3

This 2012 Honda Civic is equipped with Honda Civic LED interior set and looks very good. The featured LED upgrade provides you with comfort and style, and to be honest, these two are always welcome. The best part is that you don’t have to spend a fortune to get LED for Honda Civic, but just a few bucks. And in case a blue interior light will match your ride and style more than the Xenon White, then don’t hesitate to pick the ultra blue color option.

LED Panel Lights Interior Package for Honda Civic

Month End Blowout Sale

Brought to you by iJDMTOY.com, the expert for your Car LED. MONTH-END Sale, for more information about LED interior lights installation, please check How to install LED Panel Lights or How to install LED dome light base on a Hyundai. 7/30 & 7/31, when you order over $100 get 15% off using promo code: JulyEnd

How to Install LED bulbs for License Plate Lights | Honda Accord Civic

It has recently been standard and popular for more recent cars to get LED lights on their license plates. The reason why? The LED lights are inarguably much better looking and brighter.

Now, if you own a Honda Accord, Honda Civic or Acura TSX model, below are the step-by-step about how you can set up LED lights on the license plate:

  • Find the ideal LED lights for the Honda Accord/Honda Civic/Acura TSX. All you get to do is to go on the internet. Your 1st stop is Osram Bulb Guide. You can easily find the bulb size you need for the license plate lights which is size 168. Then, your 2nd stop is iJDMTOY.com. Make a simple search for the any of the following key phrases like "Honda Accord", "Honda Civic", "Acura TSX", "168 LED ", "license plate bulbs". In a few moments, you can already obtain the a lot of links about the LED license plate lights that will fit your vehicle. Of course, it is important to limit your search by the color and LED bulb design. Prior to you make the purchase, find out about your local law for the LED coloring. Some States do not permit the use of colored LED lights put in over the license plate.
  • Install the new LED lights on your Honda Accord/Honda Civic/Acura TSX. Open your car's trunk. Try to find the trunk lid liner. It is the carpeted part. Take it out. Then, get a screwdriver. Begin loosening all of the plastic clips. Let each of them pop out. Be more careful the following. You do not wish to break any of those plastic clips. Don't push them out. Depend on your screwdriver in doing the job smoothly. Also, keep all the plastic clips together. You will need all them so that you can reinstall the trunk lid liner back.
  • Once you have taken off the trunk lid liner, take a look at the bulb sockets. There are 2 of them and they are made of plastic. Reach the first bulb socket. Twist it bit by bit. Twist counter-clockwise. Keep on twisting until it gets completely loose and you can remove the light bulb. Move forward by swapping it with one of your new LED bulbs. Do the same methods to replace the second bulb socket with another new LED bulb.
  • Take a look if the new LED lights are functioning properly. Before you put back everything, check your recently mounted LED bulbs by turning on your car's lights. If they are not working properly, try to reverse them around 1st. See if there is any improvement. If still nothing happens, check the metal contacts. Try to spread them out a little bit. Next, put the bulbs again. This should do the trick. If they are ALRIGHT, use your screwdriver and use it to install back the plastic clips. Tighten them. And then, reposition the carpet cover over the trunk lid liner.

If you have picked up the appropriate LED lights for your license plates, your buddies, and co-workers are surely gonna be thrilled to note the improvement. Of course, besides from standing out, the license place will certainly be properly seen.

Here are some pictures for how to install the LED License Plate Lights, please take a look

For more about Car LED lights, please visit us at www.iJDMTOY.com