Thinking about some kind of LED upgrade but not sure where to start? Or maybe you want to dabble in the world of car modifications but wasn’t sure what installations would do you Mercedes-Benz justice? You can try to get your feet wet with LED license plate lights if you want to look different from everyone else on the road without having to try anything too advanced. This high powered OBC error free LED license plate light is a great choice.
There is no modification required for this installation, but it may be a little tricky when it comes to accessing the license plate lamp from outside of the trunk. You can remove the trunk liner/trim for better access.
1. Take off the trunk lid’s inside panel and take off the carpet behind the trunk lid.
These are CAN-bus error free LED turn signal bulbs on a Volkswagen and come in either xenon white or amber yellow. They serve to replace the stock PWY24W/PW24W incandescent bulbs for a whole new clear look. Not only are they brighter and sharper, they also have a faster response time than stock bulbs. Their clear look also gets rid of the "fried egg" look. Because this LED turn signal bulb is a plug-and-play, there is no modification required.
1.) Remove the tail lamp to gain access to the rear of the turn signal lamp.
Swapping out the old interior lights with a new LED Interior Kit is relatively easy with plug-and-play installation and no modification required. If you’re a beginner when it comes to car mods, this installation is perfect for you. This is a great way to upgrade your ride with a new crisp looking LED Interior with new map lights and dome lights.
One of our customers installed this LED Interior Kit on a 2004 BMW 325ci and as you will see, the installation process is pretty straightforward and he got a whole new look without putting in too much effort.
1. Use a pry tool to pop out the plastic lens cover.
These LED daytime running lights are a great upgrade for those who want to make their Mercedes W204 C-class a little bit more unique on the road. They are a great new look for any C-class with a sport bumper and can really elevate the look by a good amount. The LED daytime running lights are a direct replacement on so there’s absolutely no modification required for the installation. The direct fit of this LED DRL just replaces the entire old stock fog lamp bezel and gives you a new LED bar nestled at the top of the bezel for a whole new upgrade. The lights are conspicuous enough to have a significant effect on the way your car is presented, but not too overly bold that it’s tacky, making it the perfect balance of class.
1. There are two screws located in the far left and far right corners of the stock fog lamp bezel that you will need to remove. Most LED DRL applications have clips to secure it onto the vehicle, but we have found out through extensive testing that the Mercedes C-Class actually has screws instead of clips. Please thoroughly inspect the bezel for screws so you don’t try to pry off the stock fog lamp bezel and damage it.
This set of xenon white 16-LED high powered daytime running lights for the 2013-up Ford Fusion (aka Ford Mondeo) gives your car a new look and replaces the original fog lamp bezel or lower bumper grille cover. It has a metal finish look and piano black glossy finish that make it look ultra luxurious, as well as 7.5W in each lamp and a special anti-glare design for safety purposes. The LED DRLs are great for both models of the Ford Fusion with or without the OEM fog lamps with no modification required. Here is how you install these LED daytime running lights.