Tag: LED bulbs
The featured 2005 BMW M3 has a perfect blend of style and performance, but when LED Angel Eyes Rings from iJDMTOY were installed, this ride looks awesome. Since M is the most powerful letter in the world, this model deserves only top quality products and modifications. iJDMTOY knows it and offers the brand new xenon white 7000K LED Angel Eyes Kit not only for 2005 BMW M3, but for all the BMW E46 3 Series without factory equipped HID xenon headlights.
Take a look at the beautiful front end and imagine that you have put a HID conversion kit for your headlights. I guess your car won’t look as sleek as other BMWs on the road if you stay with the stock yellowish Angel Eyes. What’s more, your ride will look ugly comparing with other BMWs on the road, but with the LED Angel Eyes Rings for BMW E46 3 Series from iJDMTOY, the headlights look so much better. This 5 stars product will make your car stand out from the rest and you can see it on the pictures!
These BMW E46 Angel Eyes are 6 times brighter than conventional CCFL BMW Angel Eyes rings, with no blind point comparing with CCFL rings. The 7000K Xenon White color is a perfect match to HID kits installed on non-factory equipped HID xenon headlights and the plug and play system guarantees no modifications needed. Plus, you can do the "fade on" and "fade off" effect using remote or key, because all relays, brackets, double-sided tapes and harness are included.
If you wonder how to install these pretty E46 Angel Eyes, then follow the steps, but if you think it’ll be easier, check out the installation video on the iJDMTOY website. First open the hood and remove the corner lenses carefully. After that remove the weather stripping plastic above the headlight and the lower trim piece, then you are ready to remove the headlight lens and the bezel around it.
The next thing you should to is to take the clips from the kit and attach them to the back of one LED Angel Eyes Ring. Once you are ready with this part, feed wires through headlight assembly holes and out the rubber grommet in back. After that you can use a screwdriver to gently open the clips and attach the ring to the headlight housing. Do the same process for the high beam light. Please note you have to leave sufficient clearance for projector movement!
Next up – wiring: Connect LED DriverPack wires to harness coming out of the headlight rubber grommet in back and tuck the DriverPacks away from heat and moisture. Then you are ready to reinstall the headlight bezel, lens, trim, weatherstripping and corner lenses. Look for a small side cubby hole to bolt the relay. Then find the rubber seal covering the positive (+) terminal and route passenger side wiring underneath. Bolt positive ring terminal from harness to the positive terminal of the battery and bolt negative ring terminal from harness to negative terminal of the battery. Put back the rubber seal in place and connect harness ends to LED DriverPack.
Next, route driver side harness inside trim cover behind the engine, then underneath seal to DME cover and finally to driver side LED DriverPack. Connect terminals and remove the DME box cover. Here you have to find the +12V accessory wire (red/white with yellow dots). Once you are ready with this, splice supplied wire tap to +12V wire. Plug spade connector from harness into wire tap and put back the DME box cover.
Remove grommet from passenger side firewall, pierce hole through grommet and thread remote wire. Here you have to punch hole in carpet, route the wire through hole and reinstall grommet. Get in the car and remove passenger footwell light. Carefully reach inside and locate remote wire that you routed earlier. This is where you have to use the supplied wire tap on red/green wire for the remote fade in/out feature. The last step is to reinstall footwell light and test the LED Angel Eyes Rings on your ride with the key remote.
This 2005 BMW M3 worth every penny and easily puts smiles on everyone’s face with the installed E46 Angel Eyes. A truly fantastic car with Angel Eyes that look very similar to the new 2011 and up BMW’s stock high power LED Angel Eyes rings. Turn your beloved BMW E46 3 Series into a head-turner with the featured product from a trustful seller.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.
BMW 135i makes impression of a very compact, squat machine, smart and classy without being overt, and with the upgraded BMW LED Interior, I take my hat off to this road beast. Road beast, yes – with 300 hp and 300 lb-ft of torque, super-fast-shifting system, this car is a dynamite! If you own a baby like that, you’ll definitely want to make it cool on the inside, too. This is where iJDMTOY comes and offers you the exact fit BMW LED Interior kit.
Just imagine you are feeling great in the cabin, the leather-wrapped steering wheel and paddle shifters look so sexy, and the dull yellowish light coming out of the interior lights ruins everything! Of course you’ll think about the featured set of Super Bright direct exact fit 44-SMD 3-Emitter 5050 Type LED interior package for BMW. The Xenon White light is up to 5 times brighter than stock interior light bulbs and is everything you need to dress up your car the way it deserves! Plus, this BMW LED kit fits not only BMW 135i, but 3 Series E90/E91, 5 Series E60/E61 and 7 Series E65/E66.
Installing these LED lights might take you about 10 minutes. Let’s start with the center interior lamp – unplug it and take it off, so you can work easily. Then remove the one-piece plastic lens cover and the two small circular plastic covers on the sides. Plug out the bulbs and install firmly the BMW Direct Fit LED Interior panel lights. Put back the two small covers first and then the main lens cover. Finally, connect the wire back and put this center interior lamp in its place. Repeat the procedure for the front interior lamp, but since it is hard to remove it, do the steps above without taking off the whole lamp. That’s it, step back and enjoy the brand new interior look of your BMW.
Without BMW LED Interior lights, the feeling in the cabin of BMW 135i is quite sombre, but when the BMW Direct Fit LED kit was installed, everything was beautifully wrought. Then you can enjoy the special kind of German functionality that BMW has made its speciality.
Brought to you by iJDMTOY.com, the expert for your Car LED. Back to School Sale from Aug 17th to Aug 26th, Get 15% OFF for using Promo Code: School.
The latest BMW E90/E92 3 Series is a great tuning platform and today we’ll review the BMW LED Interior package. As you might know, LED technology has many advantages and not only makes our vehicles cooler-than-ever, but also saves energy and is eco-friendly. However, the ultimate driving machine is destined to look cool and beasty on the road, not so eco-friendly, so let’s face it – this awesome BMW 3 Series LED Interior kit is a great replacement of the stock car interior lights.
The package includes 3 pieces SMD bulbs for front map lights, 3 pieces SMD bulbs for rear dome lights and 2 pieces SMD bulbs for foot area lights. You get all the SMD LED lights you need to dress up your car in no time. These high quality deluxe LED bulbs are long lasting, consume lower energy and emit super bright light. A great package deal for 2006-2011 BMW E90 E91 E92 3 Series 325i 328i 330i 335i, including the famous M3!
Each bulb from the LED Package for BMW 3 Series is plug and play, so basically the installation is piece of cake. Directly replace the OEM halogen bulbs with these new LED lights and you will get your ride the same sexy look as the one featured here. If you are looking for a way to save yourself the annoying staring in the dimly lit car, the BMW LED Interior package is for you. What’s more, you can pick from three available light colors to match your interior – xenon white, ultra blue or brilliant red.
The BMW LED Interior package for BMW 3 Series is a great choice if you are determined to tune up your ride. You can dress up your car in a few minutes with this direct replacement LED kit and it is completely plug and play, which means there is no room for mistake. Check out the iJDMTOY store for more!
Brought to you by iJDMTOY.com, the expert for your Car LED. Back to School Sale from Aug 17th to Aug 22nd, Get 15% OFF for using Promo Code: School. For more information about LED interior lights installation, please check How to install LED interior lights base on a BMW E60 525i or How to Install Car Interior LED Lights on a Honda Accord.
Honda S2000 – the high-revving roadster is a great platform for many tuning enthusiasts and today we’ll present you the S2000 DRL LED addon. The car was released by Honda to celebrate its golden anniversary many years ago and having this in mind, iJDMTOY designed these special direct fit 9-LED daytime running light lamps for 2004-2009 Honda S2000 (AP2).
This awesome product will replace the stock Honda S2000′s lower bumper plastic cover with very nice LED DRL. Despite the modern look of these S2000 DRL, installation is super easy. First you have to clean and prep the area, so that it is free of dirt, oil, water, etc. Then you have to identify which wire coming out of each DRL lamp is the positive (+). You can do this by simply tapping the wires to the car battery terminals. If DRL light up, then the wire, tapped to the battery’s positive is the DRL’s positive (+) – remember it. Otherwise, switch the two wires around and try again.
Once you are ready, run the wires through the hole and mount the DRL in the desired location. Please note this is a direct fit kit, but you can always use 3M tape or screws to fix it more securely. When running the wires up into the engine bay area, make sure they are tucked up and out of the way, so the wires won’t drag on the ground as you drive. Next, locate the power wires for the parking lights so that you can hook the positive (+) wire of the DRL to the positive (+) wire of the parking lights and negative (-) wire to a good metal ground free of paint (or battery’s negative). Before proceeding with the other lamp, turn on the parking lights and check of proper functions. If it does not turn on, check for any loose wire and make sure the wires don’t interfere with any moving or mechanical parts on the vehicle. In case all is good, proceed with the other Honda S2000 DRL.
The wiring method described above is fine if you want to use your LED DRL when you turn on the parking lights, but if you connect the positive (+) wire of the DRL to the ignition fuse box and negative (-) to the batter’s negative (-) terminal, the Honda S2000 DRL will turn on when the key ignition is on. However, if you are more advanced car enthusiast, you can add a switch near the dash, so you can switch them on/off whenever you like, but always have in mind the power must go through a fuse. Anyway, wiring is up to you.
If you own a Honda S2000, then you just can’t go wrong with purchasing these S2000 DRL. Check out the featured Honda S2000 – these 6000K Xenon White DRL perfectly match any HID headlights, giving the car a fresh new aggressive look. If you are looking how to make your Honda S2000 stand out, then check out the iJDMTOY website.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes. For more information about LED DRL, please check How to Install Lexus RX350 LED Daytime Running Light Bulbs or How to Install Hella LEDayline Style LED Daytime Running Lights.
This 2002 Honda S2000 is a great roadster that offers a lot of fun with the throttle pedal and when we installed the S2000 LED Interior lights, Honda’s two-seat roadster could run circles around just about anything "a la mode". In this case there are only two stock bulbs to replace with the featured 12-SMD 1210 type LED light panels and the whole installation thing is as easy as 1-2-3.
Actually, this LED kit could be installed to almost any car, truck or SUV, not just the Honda S2000, as it comes with universal adapters. What’s more, you can choose from four color options – Xenon White, Ultra Blue, Brilliant Red or Emerald Green to match your style. And if you need another reason why you should consider replacing the old yellowish bulbs aside from aesthetic purpose, LED interior lights consume less power. This means that if you forget to switch them off and they stay on all night long, there’s a very big chance you can start your car next morning. However, don’t try this test and be sure to check out the product page at the iJDMTOY online store for full list of compatible wedge and festoon housings.
As mentioned above, replacing the OEM bulbs is a breeze. First, turn off the map light and carefully remove the light cover using a small flat-head screw driver. You have to take off the stock bulb, but it’s better to make sure the stock bulb is not hot. Plug in the correct adapter, peel the 3M self-adhesive double sided tape on the back of the LED panel and stick the panel to the plastics. Finally, put back the lamp cover and enjoy! The super bright light is no match to the old stock dull and yellowish bulbs, which makes these Honda S2000 LED panels perfect for car interior lights such as map lights, dome lights or even door courtesy lights.
The owner of this 2002 Honda S2000 is very happy with the new S2000 LED Interior and slipped off into dreams of the night after a day, full of sun-drenched, horsepower-infused blasts down the highway, when he can enjoy the custom LED interior look of his ride. If you want to pamper your car with the same trendy look and add more comfort at night, then give these bulbs a shot and you won’t regret.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes. For more information about LED interior lights, please take a look at How to install LED map lights base on a Mazda6 or How to install LED Panel Lights.
Visit our friends!
A few highly recommended friends...