Tag: led daytime lights
When you see 2012 BMW F10 5 Series with H11 LED Fog lights installed, you’ll be amazed by the great output and increased visibility. Add this upgrade to the new angel eyes xenon white look and you’ll get a very sleek and sharp front end. This customer did the very same combination, purchasing high power CREE H11 LED bulbs from iJDMTOY with H11 Error Free decoder wirings for his BMW F10 535i for fog lights and the car looks cooler than ever.
Check out the pictures showing these extremely bright LED fog lights in action – all the light comes from a pair of the all new Xenon White 5W High Power CREE Q5 LED with magnified optical lens on top plus 12-SMD-5050 H11 LED lights around. Its revolutionary design combines two technologies in order to deliver maximum output and performance.
Thanks to the Error Free decoder wiring kit no annoying error warning shows up on dashboard and replacing the old stock bulbs on 2012 BMW F10 5 Series is very easy – pop out the mesh part in front on the fog light and you can reach behind to change the bulb. Plug out the old bulbs, install the decoder kit and plug in the new LED ones. Then test to make sure everything works fine without issues.
2012 BMW F10 5 Series is a very well-built German automobile, which will grab everybody’s attention, but if you want to spice up its look, then go with the H11 LED Fog lights from iJDMTOY. The owner of this bimmer made a good choice, upgrading his old fog lights with new Fog Lamp LED bulbs, because LED lights are cleaner and brighter. They are much more attractive, longer lasting than halogen bulbs, increase driving safety in bad weather conditions, and will perfectly match with Xenon White HID headlights.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.
We have got this 2012 Chevy Cruze installed our iJDMTOY exact fit 10W High Power LED DRL for its daytime running lights last week.
Our iJDMTOY High Power LED DRL will replace either 2011 2012 2013 Chevrolet Cruze’s lower bumper plastic cover or the OEM fog light lamps, and now available in Xenon White.
To install this LED DRL kit is pretty simple, just plug and play.
Below is the product page:
Color Available: Xenon White
We just installed our iJDMTOY super bright Xenon White 360 degrees T25 3156 LED bulbs for this brand new 2013 Jeep Grand Cherokee LED daytime lights last week.
Our 21-SMD 3-Emitter 5050 type T25 LED bulb will replace the stock 3156 3056 3456 4156 3155 3157 3057 3457 4157 bulb, and you can install it as turn signal lights, backup reverse lights, or tail lamp brake lights and more.
The installation for these 3156 LED bulbs is very easy, just plug and play, keep in mind if the bulb didn’t light up, just flip it 180 degrees.
Here is our product page below:
Color Available: Xenon White
Honda S2000 – the high-revving roadster is a great platform for many tuning enthusiasts and today we’ll present you the S2000 DRL LED addon. The car was released by Honda to celebrate its golden anniversary many years ago and having this in mind, iJDMTOY designed these special direct fit 9-LED daytime running light lamps for 2004-2009 Honda S2000 (AP2).
This awesome product will replace the stock Honda S2000′s lower bumper plastic cover with very nice LED DRL. Despite the modern look of these S2000 DRL, installation is super easy. First you have to clean and prep the area, so that it is free of dirt, oil, water, etc. Then you have to identify which wire coming out of each DRL lamp is the positive (+). You can do this by simply tapping the wires to the car battery terminals. If DRL light up, then the wire, tapped to the battery’s positive is the DRL’s positive (+) – remember it. Otherwise, switch the two wires around and try again.
Once you are ready, run the wires through the hole and mount the DRL in the desired location. Please note this is a direct fit kit, but you can always use 3M tape or screws to fix it more securely. When running the wires up into the engine bay area, make sure they are tucked up and out of the way, so the wires won’t drag on the ground as you drive. Next, locate the power wires for the parking lights so that you can hook the positive (+) wire of the DRL to the positive (+) wire of the parking lights and negative (-) wire to a good metal ground free of paint (or battery’s negative). Before proceeding with the other lamp, turn on the parking lights and check of proper functions. If it does not turn on, check for any loose wire and make sure the wires don’t interfere with any moving or mechanical parts on the vehicle. In case all is good, proceed with the other Honda S2000 DRL.
The wiring method described above is fine if you want to use your LED DRL when you turn on the parking lights, but if you connect the positive (+) wire of the DRL to the ignition fuse box and negative (-) to the batter’s negative (-) terminal, the Honda S2000 DRL will turn on when the key ignition is on. However, if you are more advanced car enthusiast, you can add a switch near the dash, so you can switch them on/off whenever you like, but always have in mind the power must go through a fuse. Anyway, wiring is up to you.
If you own a Honda S2000, then you just can’t go wrong with purchasing these S2000 DRL. Check out the featured Honda S2000 – these 6000K Xenon White DRL perfectly match any HID headlights, giving the car a fresh new aggressive look. If you are looking how to make your Honda S2000 stand out, then check out the iJDMTOY website.
Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes. For more information about LED DRL, please check How to Install Lexus RX350 LED Daytime Running Light Bulbs or How to Install Hella LEDayline Style LED Daytime Running Lights.
If you own a 2011 Honda CR-Z just like the featured one, then you probably might consider upgrading it a bit with CR-Z LED DRL. Look at this beautiful black car – it’s just so tempting to install a pair of super bright LED bulbs and take it for a ride. Just imagine you’re driving this 2011 Honda CR-Z in one of those neighborhoods – heads turn, necks stretch, fingers point. Everybody on the street seems to approve Honda’s new creation, but no one knows it’s just a little bit freshen up hybrid.
The first thing you notice when you replace the stock 55W 9005 (aka HB3) halogen bulb on the high beam function as daytime running lights is that no error will popup on the dashboard. Thanks to the special DRL decoders, CR-Z LED DRL bulbs light up without malfunction issue nor flickering issue. And the best part is you don’t have to spend a fortune to get this quality product, but just to take a look at iJDMTOY.
Upgrading this 2011 Honda CR-Z with CR-Z LED DRL is very easy. It takes just a few minutes, because this kit is completely plug and play. First, you must make sure the car is off, then remove both left and right stock daytime running light bulbs and harness. Connect back with the special harness to one side, and one resistor decoder to the other side. Next, plug both LED bulbs to the special wiring and plug the other resistor decoder as well. Finally, install back with the LED bulbs on each side and enjoy the new Honda CR-Z DRL!
Besides the modern look of this 2011 Honda CR-Z, the CR-Z LED DRL enhance the safety of daytime and nighttime driving, because they are quite bright and make the vehicle visible from greater distance. What’s more, this aesthetical "add-up" matches with HID headlights and is very eye-catching. Treat your ride the way it deserves, just like the owner of this one does, and enjoy everyone’s admiration.
Brought to you by iJDMTOY.com, the expert for your Car LED. Annual Event: LED DRL 20% OFF, Promo Code: DRL20, Valid from Aug 09 to Aug 11. For more information about LED daytime running lights, please check out How to Install Hella LEDayline Style LED Daytime Running Lights or Diagram on how to wire up any LED daytime running lights.
Visit our friends!
A few highly recommended friends...