3rd LED Brake Light Conversion Kit DIY Done On Scion FR-S

A very common addition that many of the newer vehicles are attempting is the installation of a stylish third brake light. In this case, it’s a conversion of the red lens that came on the car from factory into a fully functioning running and brake light. Fortunately, for the Scion FR-S and Subaru BR-Z, the factory bumper comes with a red lens near the rear diffuser that covers an empty housing. The iJDMTOY LED FRS 3rd Brake Light Conversion Kit will turn that housing into a functioning safety upgrade.

Scion FR-S LED 3rd Brake Light Conversion Kit 1

Since these lights are utilizing the factory location, extensive modifications are not required. The kit includes a drill bit that is used to create a hole for the socket and LED bulb to fit in. Each kit includes a red 18-SMD 3-Emitter 5050 LED bulb that will produce a noticeable amount of light and comes with all the parts needed for installation; you just need to supply the electrical tape and tools.

Scion FR-S LED 3rd Brake Light Conversion Kit 2

Scion FR-S LED 3rd Brake Light Conversion Kit 3

The combination of the red lens and red LED bulb produces a glow that will match many aftermarket LED tail lights and the factory center brake light behind the rear window. The lights can be wired to act as just a Scion FR-S 3rd Brake Light, turning on only when the brakes are applied. Alternatively, the lights can also be wired to act as the running and brake lights as well; this will act like the outside tail lights at night. While these lights are marketed specifically towards the Scion FR-S and Subaru BR-Z, it can be also used on other vehicles with a similar light setup such as the 2009 and up Nissan 370z and more.

Scion FR-S LED 3rd Brake Light Conversion Kit 4

Scion FR-S LED 3rd Brake Light Conversion Kit 5

LED 3rd Brake Light DIY Conversion Kit For Scion FR-S Subaru BRZ

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Scion FR-S/Subaru BR-Z LED Third Brake Light Reflector Modification

With the debut of the Toyota FT86 (or Scion FR-S and Subaru BR-Z as it is known in the United States), it has attracted a large interest of car enthusiasts. For those familiar with this car, a noticeable feature is the red reflector on the bottom of the bumper next to the reverse lights which has no light inside. While the FT86 already has a third brake light over the trunk inside the cabin, it seems to make more sense (visually) to have the third brake light at where the red reflector is instead.

Scion FR-S Third Brake Light 1

Scion FR-S Third Brake Light 2

We decided to create a simple to install, “do-it-yourself” type product that takes 1-2 hours to complete (depending on your experience). This project takes the existing reflector/reverse light housing and puts a light inside it; it does require some modification to the housing and socket.

Scion FR-S Third Brake Light 3

Scion FR-S Third Brake Light 4

Scion FR-S Third Brake Light 5

Within the next few weeks, we will have an LED install kit available for you guys which include the bulbs, wiring socket, drill bit, and all the major components for installation. This installation just requires basic tools and a 12v power drill for installation. Not only with these lights set you apart from the rest of the crowd, but will also enhance your vehicle’s visibility at night to increase safety. These lights can operate as a third brake light by itself or it can operate as both the running light and brake light.

Scion FR-S Third Brake Light 6

Scion FR-S Third Brake Light 7

Scion FR-S Subaru BRZ 4th LED Brake Light Conversion

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.