These LED daytime running lights are a great upgrade for those who want to make their Mercedes W204 C-class a little bit more unique on the road. They are a great new look for any C-class with a sport bumper and can really elevate the look by a good amount. The LED daytime running lights are a direct replacement on so there’s absolutely no modification required for the installation. The direct fit of this LED DRL just replaces the entire old stock fog lamp bezel and gives you a new LED bar nestled at the top of the bezel for a whole new upgrade. The lights are conspicuous enough to have a significant effect on the way your car is presented, but not too overly bold that it’s tacky, making it the perfect balance of class.
1. There are two screws located in the far left and far right corners of the stock fog lamp bezel that you will need to remove. Most LED DRL applications have clips to secure it onto the vehicle, but we have found out through extensive testing that the Mercedes C-Class actually has screws instead of clips. Please thoroughly inspect the bezel for screws so you don’t try to pry off the stock fog lamp bezel and damage it.
This guide is for 2008-2010 Mercedes Benz W204 C Class to convert the stock sport front bumper’s halogen fog lights to the 2011-up LCI style LED daytime running lights. This installation would give your car that nice, crisp and signature LED daytime running lights look that the new Mercedes Benz C-class vehicles are famous for. However for this installation, please keep in mind that you have to remove the front bumper to perform this installation, and there is also some retrofit modification involved where you’d have to cut the stock bumper in order to fit the new LED daytime running lights. Because of this, we highly recommend professional installation.
1. There are three screws at the corners of the stock fog lamp that you’ll need to remove in order to take out the stock fog lamp bezel. After you do this, you can remove the front bumper.
2. You’ll need to cut out the original fog lamp bed with stock fog lamp outline in order to proceed. Use a cutting tool to cut around the edges of the opening.