Pull the lower inside corner out and pull gently to work your way to the outside. When you get to the 2 outer clips, try not to pry too much. Make sure you’re pulling the insert straight and forwards out of the bumper.
This is a guide demonstrating how to install new LED Daytime Running Lights for 2012-up Volkswagen Passat. This LED DRL replaces the already existing fog light bezel with a pretty straightforward installation. You’ll be on your way a new set of LED lamps in no time at all.
Before you proceed, please note that there are two versions of the front grill: straight grill and honeycomb grill . This guide features a straight grill for demonstration, but the installation process for both straight and honeycomb grille are the same.
Here is the straight grill and the honeycomb grill:
1. Gently remove the stock bezel (fog light cover).
This installation guide shows you how to replace the stock interior lighting in your Volkswagen with a new LED exact fit interior light package. This LED package is compatible with the 2012+ Passat, 2008+ CC, 2009+ Golf or GTi. The installation is very simple and would be a great addition to your Volkswagen and change up some of the stock accessories to make your car super personalized and unique. Some important parts to remember are the hidden screws under the cover that need to be removed to begin the installation as well as the plastic piece after that. Because these lights are up to 5 times brighter than stock, this upgrade is sure to bathe you and your passengers in a warm, white glow.
1. For the front map lamp, open the panel. You will see some screws that you need to remove in order to take off the entire map lamp assembly. You will need a pry tool or a flat-head screwdriver to pop and remove the lens.