Step 1: Get a pair of at least 10ohm or higher 30ohm resistors (silver metal showing in the picture) and a pair of T-Tap Connectors (red ones showing in the picture), you can easily find them from local electronics store such as Radio Shack, Fry's, etc

Step 2: Use the T-Tap connectors to connect the resistor's two side wires.

Step 3: Find the wires that connect to the LED corner lights

Step 4: Connect the resistor parallel to the two wires from the LED corner lights using the T-Tap

Final: Put back the LED bulbs to the corner light housings and enjoy your new LED corner lights.