Category Archives: Mazda

Updates and News about Mazda for cars installed with iJDMTOY LED lights, HID lights and more.

68-SMD 9005 LED Daytime Running Lights on a 2013 Mazda CX-5

Posted on by

With a lot of the newer vehicles out on the road today, most or all of them come from factory with standard daytime running lights as a safety feature. Since most vehicles come like this as a standard feature, they are all mostly the same type of light as well which does not make your car stand out at all. This is where our LED lights come into play, they are rated at 6000K Xenon White so they provide an HID-like color that is sure to turn heads.

Mazda CX-5 9005 LED Daytime Running Lights 1

Since this particular Mazda CX-5 did not come with factory HID/Xenon headlamps, it must use a special wiring harness and resistor setup along with the LED bulbs to ensure a properly functioning light without error messages and flickering. The entire kit is plug and play and requires no modification to the stock wiring, all it needs is a safe location to mount the load resistor as it does get quite hot when the light are operating. Each LED bulb contains 68-SMD LED chips and produces 5w per bulb that produces a noticeable glow when on.

Mazda CX-5 9005 LED Daytime Running Lights 2

Although the daytime running lights are not running when the primary headlights are on, they are still a great addition to have on the vehicle as they will be a close match with most aftermarket 6000K HID lights. The daytime running lights for this vehicle also double as the high beams, but due to the way LED bulbs are designed, they will not produce the same amount of light to be safely used at night; this is an aesthetic upgrade only and its main purpose is to provide an HID-like color for the daytime running lights during the day to provide a unique look to your car.

Mazda CX-5 9005 LED Daytime Running Lights 3

9005 LED Daytime Running Light Kit

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Mazda CX-5 Looks Very Nice with LED Backup Reverse Lights

Posted on by

Look at this Mazda CX-5 – the crossover’s handsome styling backed up by the aftermarket LED Backup Lights from iJDMTOY is a great combo. One risky reverse can lead to some unexpected consequences, so illuminating the rear road with such bright backup lights can keep you away from troubles.

Mazda CX-5 LED Backup Lights 1

Each Plasma High Power T10 LED bulb is packed with an array of 1 piece 2.5W high power LED emitter on top and 4 pieces 2.5W high power LED emitter all around, pumping out approx 500 lumens of dazzling 6000K Xenon White color, consuming only 3W. Plus, the newly designed 360 degrees bulbs deliver very impressive maxima lighting output. If you have black-out tint for tail lights, you can still see the light very well.

Mazda CX-5 LED Backup Lights 2

Installing this replacement is a piece of cake – replacing the stock 168 194 2825 W5W 912 921 904 906 bulbs, it will fit in almost every car out there. Just locate the stock reverse bulb, plug it out and plug in the new one. Make sure to ask a friend to check whether these LED Backup Lights work when you switch to reverse just before you put them back in place and check the brightness once again in the nighttime. You just can’t miss the huge difference between your stock backup lights and these clear and brighter LED lights.

Mazda CX-5 LED Backup Lights 3

The Mazda CX-5 Backup LEDs on this Mazda CX-5 we talk about, offer stunning appearance and enhanced safety when backing up at night and it’s good to think about getting them, so, whether you’re crawling midnight roads or dark alleys, delivering a powerful burst of illumination of the places you’re reversing into, could be crucial. What’s more, if you are looking for a way to show-off your ride, go with the featured LED Backup Lights.

Mazda CX-5 LED Backup Lights 4

High Power Error Free 168 194 2825 W5W 912 921 T10 LED Bulbs

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

RGB LED Knight Rider Scanner For Mazda RX-7 Under Hood

Posted on by

We have got this classic Mazda RX-7 installed our brand new RGB LED Knight Rider Scanner for Mazda RX-7 under hood last week.

Mazda RX-7 Under Hood RGB LED Knight Rider Scanner 1

Mazda RX-7 Under Hood RGB LED Knight Rider Scanner 2

RGB 7-Color LED Scanner Strip Lighting Kit

Our LED scanner lighting kit includes 1 piece 20 inches (50cm) long super bright 48 RGB type SMD LED waterproof LED strip light; 1 piece Control Module; and 1 piece Remote Control (60ft range), and it’s universal fit any kinds of cars.

Please check the How to install LED Scanner Knight Rider Light for installation concept.

Here is our product page below:

48 RGB 7-Color LED Scanner Strip Lighting Kit

iJDMTOY Super Bright 20″ 48 RGB 7-Color LED Scanner Strip Lighting Kit with Wireless Remote Control (aka LED Knight Rider Light)

 

5 stars Universal Fit, Remote Control with 130 Distinct Flash Patterns
Perfect for dressing up the under car body, behind grill, hood or car interior

2011 Mazda3 Upgraded with Mazda3 LED Daytime Running Lights

Posted on by

Today’s car is this 2011 Mazda3 with very cool and stylish exact fit Mazda3 LED Daytime Lights. Ain’t it a beauty? With a set of Xenon White 7-LED high power LED daytime running light lamps this ride makes strong impression! What’s more, this product is water resistant and comes with auto on/off module box! Anyway, if you want to achieve this one-off look, then roll up your sleeves, because some work is involved.

Mazda3 LED Daytime DRL Lights 1

First, you must make sure that the Mazda3 LED DRL work fine. Simply connect the LED DRL to the harness and temporarily touch the white/positive wire coming from the DRL switch to the positive of the car battery and black/negative wire to the negative of the car battery. Then turn on the vehicle to make sure that the LED DRL work properly.

Mazda3 LED Daytime DRL Lights 2

Now, the tricky stuff: you have to remove your front bumper. There are some clips and screws that has to be removed in order to loose and remove the bumper. You can use a standard screwdriver blade to gently pry up some of the push pins. Proceed with the wheel wells. There are some push pins and screws, too. It’s easier if you turn the wheel to move the tire out of the way. Finally, the bottom. There are some more screws to remove here. Unscrew the black hex headed phillips screws only.

Mazda3 LED Daytime DRL Lights 3

With all the screws and pins out, you just pull the fascia away from the fender. Don’t be afraid, it takes a little oomph to pull out, you won’t hurt it, just pull out carefully! With both sides out, you just pull the fascia forward away from the car. There you’ll see the fog lights wire harness on the passenger side – unclip that once the fascia is loose, and then you can put the fascia aside. Once you have the front bumper removed, locate the passenger lower portion of the bumper where the LED DRL light is supposed to be installed at. There should be a plastic cover that have to be removed away to allow the LED lamp to fit into the hole.

Mazda3 LED Daytime DRL Lights 4

Let’s get back to the lights – unscrew the 6 Phillips head screws that attach the black bezel to the back of the LED DRL lights and remove the bezel. Next, trace out the general outline of the size of the chrome LED lamp from the back of the bumper. Once you have traced it, cut away the plastic using a dermal tool. Just a hint: start with a small hole in order to avoid unwanted cuts. When the hole is large enough, insert the LED lamp from the front of the bumper and attach the black bezel portion using the 6 Philips head screws to clamp the LED lamp to the bumper securely.

Mazda3 LED Daytime DRL Lights 5

Finally, route the wires up through the front and use zip ties to secure the wiring. Make sure they won’t touch anything hot, sharp, etc. Secure the module box near the car battery and put back everything together. Don’t forget to test again the newly installed Mazda3 LED Daytime Lights before reinstalling the bumper!

Mazda3 LED Daytime DRL Lights 6

Now, when you have already equipped your 2011 Mazda3 with the featured Mazda3 LED DRL from iJDMTOY, take it out for a spin! See how people look at your car while driving down the street. Remember that these exact fit Mazda3 LED Daytime Lights will do magic with your 2010 and up Mazda3 only if it has front bumper like this one here.

Mazda3 LED Daytime DRL Lights 7

High Power LED BMW Angel Eyes H8 Ring Marker Bulbs

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Mazda 3 with Audi Style LED Strip – a Lovely Combination

Posted on by

It’s a bird… It’s a plane… No, it’s a Mazda 3 with Audi Style LED Strip! Have you ever wondered how does it look a Japanese car with a pinch of German flavor? Well, here’s the answer – Audi LED Strips are very popular nowadays and you can see how they look installed on this Mazda 3 under the headlight around the lower bumper position.

Mazda 3 Audi Style LED Strip Lights 1

I find this combination both aesthetic and functional – it brings the car a fresh new European LED daytime running lights (DRL) look like the new Audi A5 R8 style LED headlights or Mercedes E Class LED Fog Lights (aka LED Driving Lights) and enhances the road safety at the same time. However, if you want to experiment with your ride, pick an universal fit high quality product – Audi Style LED Strip from iJDMTOY.

Mazda 3 Audi Style LED Strip Lights 2

Each LED strip is 20" (50cm) long, waterproof for worry-free exterior use and has flexible design with wide edge, so it could bend almost any shape and easy to attach anywhere firmly. Another cool feature is that no matter how you flip this LED strip, the LED lights will always face the front – perfect for decorating the headlight lamps, fog lights or driving lights. Or you may insert this flexible LED strip in between the gap of the headlight lamp and bumper or under the bumper – it’s up to you. In case you wonder how to install this product, it is self-adhesive on the back, which makes it very easy to install. Finally, just tap to any 12V power source such as parking lights and enjoy the fancy new look. Not sure what to do if you installed the strip, but it is longer than you need? Don’t worry – each strip is cuttable every 3 LEDs, which guarantees perfect fit.

Mazda 3 Audi Style LED Strip Lights 3

These Audi Style LED Strip Lights will make any car more attractive, not just this Mazda 3. Now you have the opportunity to get your ride a fresh new European LED daytime running lights (DRL) look for just a few bucks! If you want to rock the streets in style, this "wow" upgrade will do the job in no time!

21-SMD Flexible LED Strip Lights For Headlights, Fog Lights

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.