Tag Archives: LED DRL

2007 Honda S2000 Thanks to Error Free S2000 H1 LED DRL Kit

Posted on by

Check out this pearl-white 2007 Honda S2000 – it makes great impression with the S2000 H1 LED DRL installed. The very sleek and stylish look of this S2000 embraces the classic and smooth curves of the best roadsters, but the old stock bulbs somehow weren’t in place. So, having this in mind, the featured H1 LED bulbs are perfect replacement for the old halogen ones and take this car to the next level.

Honda S2000 H1 LED DRL 1

Each H1 LED bulb has 12-SMD-5050 LEDs that come in Xenon White or Ultra Blue color to match with your car appearance and HID headlights. The kit also includes a special decoder set for the 2006-2009 Honda AP2 S2000 to ensure the LED bulbs light up at full power without malfunction issue nor flickering issue. With a lifespan of about 200000 hours, you’ll enjoy the brand new look this high quality product gives for quite a long time.

Honda S2000 H1 LED DRL 2

Replacing the stock bulbs is a matter of minutes even for people with very little car experience, as this item comes with installation diagram. However, you can always contact the experts at iJDMTOY for additional instructions and tips. But let’s move on – turn off the vehicle, then plug out the stock high beam harnesses and bulbs. Take one of the included adapters and connect it to the resistor, then to the driver side high beam harness. Take the other adapter, connect it to the included wiring kit, then to the passenger side high beam harness. Plug one of the short wires in the Honda S2000 H1 LED bulb adapter and install the bulb. Leave the other one absent and run the longer wire to the driver side headlight where the same bulb installation have to be done. Finally, check if everything works.

Honda S2000 H1 LED DRL 3

If you love this 2007 Honda S2000 with Honda S2000 H1 LED bulbs, then getting the very same look for your own high-revving roadster has never been closer. We know drivers want the style but not the headaches and this is why you should consider installing the S2000 H1 LED DRL Error free kit. A distinctive car always gets attention and with proper upgrades, it could be turned into a head-turner without spending a fortune.

Honda S2000 H1 LED DRL 4

H1 LED Daytime Running Light Bulbs + DRL Decoder Wiring Kit

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Kia Optima Looks More Luxurious with Kia Optima DRL Installed

Posted on by

Kia Optima cuts a distinctively aggressive and appealing profile by itself, but today’s Kia Optima DRL LED upgrade will make it look premium. Please note that this product will only fit the Kia Optima with factory equipped fog lamps and not the Hybrid. Anyway, if you want to enhance your K5’s exterior appearance with these long lasting, super bright LED lights and want to be different, you have to get your hands on it and do it.

Kia Optima OEM DRL 1

Installing the featured Kia K5 LED DRL will take some time and some skills are involved, too. Before going further you should know the plastic lamp bezels are unpainted, so you have the option to paint them in any color you want to match with your Kia Optima.

Kia Optima OEM DRL 2

Now, let’s get to the point – first you have to remove the front bumper by removing all the clips and screws from the top cowl portion of the vehicle, as there might be additional clips and screws underneath the bumper and the wheel well. Once you are ready with this task, on the back of the bumper you’ll see the stock fog lamp bezel clips and screws. Remove it carefully and replace it with the new bezel.

Kia Optima OEM DRL 3

Then you have to cut out a portion of the bumper crash beam with an air saw or hacksaw, but cutting this portion will not compromise any driving safety, because the Korea models Kia K5 and the all new 2013 Optima SX (with stock LED DRL) both have the slightly shorter crash beam. However, please check the iJDMTOY website for video and more details on this part.

Once you are ready with the cutting, let’s do the wiring. Locate the OE harness coming from the vehicle and connect it to the 5-pin connector from the DRL lamp. You will use the H11 connector from our lamp to connect to your stock fog lamp. There are two ways to wire the LED DRL to ACC – the first one is DRL always on, the second one is DRL off when fog lights are on and vice versa. For this part you should really see the iJDMTOY tutorial on the product website page. When you finish with this don’t forget to check that everything is working fine before installing the bumper back in place.

This Kia OEM DRL LED kit offers an extraordinary luxurious eye catching appearance to the Kia Optima K5 during the day and definitely worth the money an effort you put in. If you go with the setup that ties into the fog lights, so they are off when fogs are on, you will add another dimension to the front end look with the Xenon White Kia Optima DRL from iJDMTOY.

Exact Fit 12-LED High Power LED Daytime Running Lights

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

BMW F10 5 Series – Cooler Than Ever with H11 LED Fog Lights

Posted on by

When you see 2012 BMW F10 5 Series with H11 LED Fog lights installed, you’ll be amazed by the great output and increased visibility. Add this upgrade to the new angel eyes xenon white look and you’ll get a very sleek and sharp front end. This customer did the very same combination, purchasing high power CREE H11 LED bulbs from iJDMTOY with H11 Error Free decoder wirings for his BMW F10 535i for fog lights and the car looks cooler than ever.

BMW F10 5 Series H11 Fog Lamp LED Bulbs 1

Check out the pictures showing these extremely bright LED fog lights in action – all the light comes from a pair of the all new Xenon White 5W High Power CREE Q5 LED with magnified optical lens on top plus 12-SMD-5050 H11 LED lights around. Its revolutionary design combines two technologies in order to deliver maximum output and performance.

BMW F10 5 Series H11 Fog Lamp LED Bulbs 2

Thanks to the Error Free decoder wiring kit no annoying error warning shows up on dashboard and replacing the old stock bulbs on 2012 BMW F10 5 Series is very easy – pop out the mesh part in front on the fog light and you can reach behind to change the bulb. Plug out the old bulbs, install the decoder kit and plug in the new LED ones. Then test to make sure everything works fine without issues.

BMW F10 5 Series H11 Fog Lamp LED Bulbs 3

2012 BMW F10 5 Series is a very well-built German automobile, which will grab everybody’s attention, but if you want to spice up its look, then go with the H11 LED Fog lights from iJDMTOY. The owner of this bimmer made a good choice, upgrading his old fog lights with new Fog Lamp LED bulbs, because LED lights are cleaner and brighter. They are much more attractive, longer lasting than halogen bulbs, increase driving safety in bad weather conditions, and will perfectly match with Xenon White HID headlights.

H11 (H8) LED Bulbs For Fog Lights

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

2013 Jeep Grand Cherokee Looks Stunning with 3157 LED DRL

Posted on by

2013 Jeep Grand Cherokee is piece of art – a masterful meld of classic styling cues and modern design, and if you upgrade the round headlamps with the featured 3157 LED DRL bulbs, the magic happens. Take a look at the pictures showing this gorgeous SUV – at first sight you know it’s a Grand Cherokee, but it looks a lot better. This stylish new front matches perfectly the signature seven-slot grille and the overall appearance of the vehicle.

Jeep Grand Cherokee 3157 LED DRL 1

As I stated earlier, the key to this brand new look is the 3157 LED bulb – a perfect replacement for the stock unit. Each LED bulb has 40 pieces 1210 SMD LED Chips made by CREE Electronics – it is brighter than the stock filament bulb and shines in Xenon White color. Of course, you can pick this great product in Brilliant Red color, too. Either way, you’ll end up with very good-looking ride that will stand out from the crowd.

Jeep Grand Cherokee 3157 LED DRL 2

Replacing the stock bulbs is as easy as pie. Just locate the back of the lamp, then twist its socket and plug out the OEM halogen bulb. After that replace the stock bulb with the completely plug and play Jeep Grand Cherokee LED DRL bulb and insert it back. No error will popup on the dashboard and flawless work is guaranteed. However, if you drive a vehicle different from 2013 Jeep Grand Cherokee and use these LED bulbs for turn signal lights, you might need to add a pair of load resistors to prevent hyper flashing or malfunction problem.

Jeep Grand Cherokee 3157 LED DRL 3

This 2013 Jeep Grand Cherokee is a proof that even small tweaks like these 3157 LED DRL bulbs from iJDMTOY can make big difference. Since this type of bulbs is used for turn signal lights, brake tail lights, parking lights and backup reverse lights in various models, you can check the Osram Sylvania Lamp Replacement Guide to find out whether it will fit your ride.

Jeep Grand Cherokee 3157 LED DRL 4

3156 3157 3056 3357 4157 LED Bulbs

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

2012 Chevrolet Cruze Installed iJDMTOY High Power LED DRL

Posted on by

We have got this 2012 Chevy Cruze installed our iJDMTOY exact fit 10W High Power LED DRL for its daytime running lights last week.

Chevy Cruze High Power LED DRL 1

Chevy Cruze High Power LED DRL 2

10W High Power LED Daytime Running Lights

Our iJDMTOY High Power LED DRL will replace either 2011 2012 2013 Chevrolet Cruze’s lower bumper plastic cover or the OEM fog light lamps, and now available in Xenon White.

To install this LED DRL kit is pretty simple, just plug and play.

Below is the product page:

Mercedes W204 Style 10W High Power LED Daytime Running Lights

iJDMTOY Exact Fit Mercedes W204 Style 10W High Power LED Daytime Running Lights For 2011 and up Chevrolet Cruze

 

5 stars Color Available: Xenon White
Exact Fit, Plug-N-Play