Category Archives: Subaru

Updates and News about Subaru for cars installed with iJDMTOY LED lights, HID lights and more.

Benefits of Scion FR-S Direct Fit LED Interior Light Package

Posted on by

LED interior packages are a great way to improve the light output inside your car at a reasonable cost. LED replacement bulbs are the easiest way to achieve this, but they may not always give you the same amount of output you’re looking for. LED replacement bulbs replace the factory incandescent bulb with an equivalent LED version which allows more light output, but the amount of light that is distributed is still the same. Direct fit LED panel packages are circuit board panels with many LED diodes on it that distribute the light in a very wide pattern and are also brighter which creates a better result.

Scion FR-S Direct Fit LED Interior Lights 1

Scion FR-S Direct Fit LED Interior Lights 2

As seen on this Scion FR-S with our direct fit LED interior package, it gives off much more light output than a regular LED bulb replacement would. This specific package provides exactly 110 SMD LED diodes between the map and trunk light; the front map lights utilize a huge 90-SMD 3020 LED panel for a blinding output and the trunk uses a smaller 20-SMD 3020 LED panel. Our panels are typically only available in 6000K Xenon White, but they are available as Ultra Blue for a select few. Since the Subaru BR-Z is virtually the same car, our Scion FR-S direct fit LED interior package will also work as a Subaru BRZ direct fit led interior package also!

Scion FR-S Direct Fit LED Interior Lights 3

Scion FR-S Direct Fit LED Interior Lights 4

Scion FR-S Direct Fit LED Interior Lights 5

The amount of LED diodes on the panel will vary depending on kits for various vehicles, but it is considerably more than a standard bulb replacement would have. In addition to that benefit, the size of the panel allows the light to shine from a larger surface area. LED panels are noticeably more expensive than the regular standard LED bulb replacements, but the benefits are highly worth it if the need for an ultra-bright cabin light is needed.

Scion FR-S Direct Fit LED Interior Lights 6

Exact Fit 110-SMD Complete LED Interior Package for 2013 and up Scion FR-S Subaru BRZ

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

18W OEM Style LED Fog Lights for the 2013 and up Scion FR-S

Posted on by

As part of our vastly growing Scion FR-S and Subaru BR-Z section on our website, our 18W LED Fog lights should be a part of any FR-S/BR-Z owner’s wish list. While some people may opt for our LED Daytime Running light kit that replaces the fog lights, some people prefer to retain the OEM look with these lights. These OEM style LED fog lights is a complete fog light replacement and is also plug and play with the factory fog light wires; because these are meant as a direct OEM replacement, there is no wiring harness included. Vehicles without factory equipped fog lights will have to wire these lights to a power source and obtain a bezel with a fog light cut out.

Scion FR-S LED Fog Lights 1

Each lamp uses six 3W LED diodes which are combined to create a total output of 18W per lamp, per side. These super bright LED fog lights are 6000K Xenon White so they are a perfect addition to our other LED replacement lights. Each lamp also has a 2-LED 7000K Angel Eye ring that can be optionally wired to your parking lights to mimic that BMW halo look. This is a perfect match with our LED angel eye set for the headlights for these cars.

Scion FR-S LED Fog Lights 2

Scion FR-S LED Fog Lights 3

The installation is very straight forward and it can be done within a few hours for the inexperienced and within an hour for an experienced DIY-er. We specifically designed these lights to match well with our other LED lights like the switchback bulbs so everything flows together well.

Scion FR-S LED Fog Lights 4

Scion FR-S LED Fog Lights 5

LED Fog Lights Assembly w/ LED Halo Angel Eyes Rings for Scion FR-S Subaru BRZ

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

3rd LED Brake Light Conversion Kit DIY Done On Scion FR-S

Posted on by

A very common addition that many of the newer vehicles are attempting is the installation of a stylish third brake light. In this case, it’s a conversion of the red lens that came on the car from factory into a fully functioning running and brake light. Fortunately, for the Scion FR-S and Subaru BR-Z, the factory bumper comes with a red lens near the rear diffuser that covers an empty housing. The iJDMTOY LED FRS 3rd Brake Light Conversion Kit will turn that housing into a functioning safety upgrade.

Scion FR-S LED 3rd Brake Light Conversion Kit 1

Since these lights are utilizing the factory location, extensive modifications are not required. The kit includes a drill bit that is used to create a hole for the socket and LED bulb to fit in. Each kit includes a red 18-SMD 3-Emitter 5050 LED bulb that will produce a noticeable amount of light and comes with all the parts needed for installation; you just need to supply the electrical tape and tools.

Scion FR-S LED 3rd Brake Light Conversion Kit 2

Scion FR-S LED 3rd Brake Light Conversion Kit 3

The combination of the red lens and red LED bulb produces a glow that will match many aftermarket LED tail lights and the factory center brake light behind the rear window. The lights can be wired to act as just a Scion FR-S 3rd Brake Light, turning on only when the brakes are applied. Alternatively, the lights can also be wired to act as the running and brake lights as well; this will act like the outside tail lights at night. While these lights are marketed specifically towards the Scion FR-S and Subaru BR-Z, it can be also used on other vehicles with a similar light setup such as the 2009 and up Nissan 370z and more.

Scion FR-S LED 3rd Brake Light Conversion Kit 4

Scion FR-S LED 3rd Brake Light Conversion Kit 5

LED 3rd Brake Light DIY Conversion Kit For Scion FR-S Subaru BRZ

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

Scion FR-S/Subaru BR-Z LED Third Brake Light Reflector Modification

Posted on by

With the debut of the Toyota FT86 (or Scion FR-S and Subaru BR-Z as it is known in the United States), it has attracted a large interest of car enthusiasts. For those familiar with this car, a noticeable feature is the red reflector on the bottom of the bumper next to the reverse lights which has no light inside. While the FT86 already has a third brake light over the trunk inside the cabin, it seems to make more sense (visually) to have the third brake light at where the red reflector is instead.

Scion FR-S Third Brake Light 1

Scion FR-S Third Brake Light 2

We decided to create a simple to install, “do-it-yourself” type product that takes 1-2 hours to complete (depending on your experience). This project takes the existing reflector/reverse light housing and puts a light inside it; it does require some modification to the housing and socket.

Scion FR-S Third Brake Light 3

Scion FR-S Third Brake Light 4

Scion FR-S Third Brake Light 5

Within the next few weeks, we will have an LED install kit available for you guys which include the bulbs, wiring socket, drill bit, and all the major components for installation. This installation just requires basic tools and a 12v power drill for installation. Not only with these lights set you apart from the rest of the crowd, but will also enhance your vehicle’s visibility at night to increase safety. These lights can operate as a third brake light by itself or it can operate as both the running light and brake light.

Scion FR-S Third Brake Light 6

Scion FR-S Third Brake Light 7

Scion FR-S Subaru BRZ 4th LED Brake Light Conversion

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.

9005 LED Daytime Running Lights for a Fancy Subaru Impreza WRX

Posted on by

The recent aesthetic feature of most of the newer vehicles being released to the public are the LED daytime running lights which are lit up as a white light. LED lights offer a variety of advantages over standard incandescent lights such as: more efficiency in converting power into light, less power consumption, and a much more appealing color of light and many more! However, not every vehicle has this luxury of a factory installed LED daytime running light so for the vehicles that came with incandescent lights for the DRLs; we have a solution available which is our LED replacement bulbs.

9005 LED DRL 1

Installed on this Subaru Impreza WRX is our 68-SMD 9005 LED replacement bulbs which are a direct replacement to the factory bulbs and do not require any type of modification or additional components. These simple to install bulbs change the color from a dull yellow to a unique 6000K Xenon White color that will closely match aftermarket 6000-8000K color HID kits.

9005 LED DRL 2

Since the high beams are also the same bulb as the daytime running light, some of you may wonder if the high beam function will still work and the answer is yes; although we do recommend only replacing these lights for their aesthetic qualities rather than the actual output at night during high beam mode.

9005 HB3 LED Daytime Running Light Bulbs for Subaru Impreza or Subaru WRX STi

Brought to you by iJDMTOY.com, the expert for your Car LED. Follow us on Facebook for exclusive promo codes.